Henry releases a revolver

[whacko]

There's the Manurhin MR73 at $3,600.
Korth at $5,000
Janz at $Don'tEvenAsk
Kimber K6 at $1,200.
EAA at $454.
BrazTech (Rossi) at $580.

So I has to Google janz revolvers. Holy shit a 22lr janz sells for $12k. The convertible one sells for $42k.

 

[whacko]

Didnt they just make some kind of 9mm pcc also?

The homesteader.

If they release one in 45acp they can take my money.

 

[ware]

So I has to Google janz revolvers. Holy shit a 22lr janz sells for $12k. The convertible one sells for $42k.

The manhurhin is so cooool.

 

[whacko]

The manhurhin is so cooool.

Kittery trading post had a Korth 357 a few weeks ago. Damn they are purdy

 

[Mesatchornug]

There's the Manurhin MR73 at $3,600.
Korth at $5,000
Janz at $Don'tEvenAsk
Kimber K6 at $1,200.
EAA at $454.
BrazTech (Rossi) at $580.

I realized after I made that post I had dropped a couple. and now you give me new ones

 

[Coyote33]

I'll take a Kimber, 100% machined parts:

Here, lightened it up a little for you:

 

[Broc]

From Henry I would expect a Lever Action Revolver resembling something like Bounty Hunter Josh Randall carried in Wanted Dead or Alive;
Or maybe a rifle like the 1855 Colt Revolving Carbine.

View attachment 742074


View attachment 742087

1. You can buy revolver carbines.

2. You can have a revolver turned into one:

Revolving Rifle Prices - Fairfax Firearm Repair LLC

Fairfax Firearms Repair builds revolving rifles on Magnum Research BFR. Ruger single action revolves as well as recreation of the S&W 320 and a great small rifle and plinker built on the Nagant revolver. We can Build Revolving Rifles on double action revolvers as well, however, due to the...

fairfaxfirearmsrepair.com

(I have never done business with them)

 

[Broc]

I'll take a Kimber, 100% machined parts:

That Kimber looks sexy.

 

[DW357]

I’m a big Henry fan and an even bigger revolver fan. But

 

[pinefd]

That Kimber looks sexy.

I love mine!

Frank

 

[fencer]

This is a shame. It looks like they forgot to finish it. No rear sight? Dangling extractor?
It's like a gimmick gun... Useless beyond 20', not for rugged use. For $1000? Nope.

Best looking 4" - 357 wheel gun...

Followed by

 

[Woodsloafer]

I love mine!

Frank

That's nice, and no MIM parts.

 

[Chevy 2 65]

There's the Manurhin MR73 at $3,600.
Korth at $5,000
Janz at $Don'tEvenAsk
Kimber K6 at $1,200.
EAA at $454.
BrazTech (Rossi) at $580.

Janz. $12,500.

Sexy but NOPE.

 

[Mesatchornug]

This is a shame. It looks like they forgot to finish it. No rear sight? Dangling extractor?
It's like a gimmick gun... Useless beyond 20', not for rugged use. For $1000? Nope.

Best looking 4" - 357 wheel gun...

Followed by

What's that blemish over the cylinder release?

 

[fencer]

What's that blemish over the cylinder release?

Buy an old one. I just disabled mine. Plenty of youtube videos

 

[drgrant]

I'd have to shoot one to be sure but my first impression is that it's pretty expensive for such an ugly revolver.

That's not expensive for a mainstream revolver anymore. Plus MSRP has a lot of points in it, more than most decent shops will usually sell it for.

 

[drgrant]

There's the Manurhin MR73 at $3,600.
Korth at $5,000
Janz at $Don'tEvenAsk
Kimber K6 at $1,200.
EAA at $454.
BrazTech (Rossi) at $580.

Last MR73 4" i looked at was $2800. Sucks because years ago there were imported used ones going for like $600. /lost opportunity crying towel moment

 

[Mesatchornug]

Buy an old one. I just disabled mine. Plenty of youtube videos

For now, I'll just keep slumming with my 28-2

 

[KBCraig]

Didnt they just make some kind of 9mm pcc also?

Yep, and it looks like a sweet gun. Takes Glock mags if you choose that mag well option. The Henry mags are 5/10/15 rounds.

 

[KBCraig]

Last MR73 4" i looked at was $2800. Sucks because years ago there were imported used ones going for like $600. /lost opportunity crying towel moment

These are new ones imported by Beretta.

Manurhin MR73 Gendarmerie.

The Manurhin MR73 series of revolvers was developed specifically for the French Gendarmerie and French special service police and military units.

www.beretta.com

 

[tuna]

Hard pass. Doesn’t look like it was finished.

 

[FrankNA]

Here’s my new to me Kimber K6s DASA 3” with target grips. Practical, functional, looks good and at 25 oz. is sweet to carry. I’ve got a 686+ with 3” barrel and love that gun but at 40 oz. its just not an easy gun to carry and conceal (IMO & experience).

 

[TG Pioneer]

Call me crazy but I kind of like the look of the 357 with the bird’s head grips. A pencil barrel and half dime sight would improve the lines considerably, however.

 

[Mountain]

$12,500 Janz

$1,250 Monson era Dan Wesson

I already have a DW, so guess I should throw a party with the savings?

 

[Broc]

This is a shame. It looks like they forgot to finish it. No rear sight? Dangling extractor?
It's like a gimmick gun... Useless beyond 20', not for rugged use. For $1000? Nope.

Best looking 4" - 357 wheel gun...

Followed by

Lol, you post a pic of a SW to say a company forgot to finish a gun.

SW ships kit revolvers, not complete revolvers.

It has a rear sight, old school sight.

 

[Mountain]

Lol, you post a pic of a SW to say a company forgot to finish a gun.

SW ships kit revolvers, not complete revolvers.

It has a rear sight, old school sight.

Earlier SW's are nice.

 

[Broc]

There's the Manurhin MR73 at $3,600.
Korth at $5,000
Janz at $Don'tEvenAsk
Kimber K6 at $1,200.
EAA at $454.
BrazTech (Rossi) at $580.

Magnum Research
UBERTI

 

[Enzo]

This guy is definitely a revolver guy.

 

[FrankNA]

@pinefd How do like the Hogue Bantam grips? Picked them up recently but haven’t installed them yet - heard they’re pretty comfortable and shock absorbing.

 

[PATRON]

Just doesn't do it for me.