mu2bdriver
NES Member
- Joined
- Jan 7, 2009
- Messages
- 1,656
- Likes
- 2,236
If you know your way around a Glock, you really shouldn't need a video to figure it out.
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
Or a razor bladeIf you know your way around a Glock, you really shouldn't need a video to figure it out.
And a pair of dykes.Or a razor blade
Not all of us know our way around the inernal components, videos are very helpful.If you know your way around a Glock, you really shouldn't need a video to figure it out.
Screwing one up when there was a dozen more at the LGS wasn't the end of the world. Sadly those days are gone.Not all of us know our way around the inernal components, videos are very helpful.
A ton of videos?I used a ton of vids for two builds over the last two weeks, there's a lot still up but they're mostly Glock maintenance builds rather than 80% build tips. If you want the OG Marine Gun Builder vids, someone mirrored the instructional ones on Odyssee.
A ton of videos?
To show you how to file 3 small pieces of plastic?
I am confused.
The rest are just assembling videos and it is full of those on YouTube.
After you do one you can put one together in about 5 minNot all of us know our way around the inernal components, videos are very helpful.
Over the past three years, Polymer80 did everything to roll over for AFT. They gave AFT customer lists of who bought their kits. They no longer sell 80% frames. The only frames they sell are serialized and registered with AFT.Don’t know who couldn’t have seen this coming as Polymer 80 needs to defend their business (and our rights in the balance).
They are trying to survive.Over the past three years, Polymer80 did everything to roll over for AFT. They gave AFT customer lists of who bought their kits. They no longer sell 80% frames. The only frames they sell are serialized and registered with AFT.
So yes, I am surprised they grew a pair.
Over the past three years, Polymer80 did everything to roll over for AFT. They gave AFT customer lists of who bought their kits. They no longer sell 80% frames. The only frames they sell are serialized and registered with AFT.
So yes, I am surprised they grew a pair.
2A is useless if a populous under foreign rule* continues to sit on its hands and wait for those same people* to fix what's broken in America. SCOTUS is just as infiltrated as the rest of the US government!The bureaucratic f***ing the people are subject to in this country goes well beyond guns. Lifetime deep staters sit behind their desks writing rules to control the populace with zero accountability (they are not elected). This is not what the founders intended. Hopefully SCOTUS will continue to chip away at issues like this (EPA ruling on emissions at power plants). I'm not holding my breath, though.
Several sites have them in stockSo a few resellers have already removed all evidence of 80% AR frames. Sad. How much is a 5 pack of anodized lowers now? Next year?
Run for president elimate the powers of regulationThe bureaucratic f***ing the people are subject to in this country goes well beyond guns. Lifetime deep staters sit behind their desks writing rules to control the populace with zero accountability (they are not elected). This is not what the founders intended. Hopefully SCOTUS will continue to chip away at issues like this (EPA ruling on emissions at power plants). I'm not holding my breath, though.
Yep, but. You can imagine the what the government told them was going to happen if they didn't hand over the info. Unlike companies like Smith and Wesson and Colt kneeling down for the powers that be. Polymer 80 is not a huge power entity. They don't have the resources to go toe to toe with the ATF when forced to shut down. Unlike now, they have regrouped and are at least trying to get things changed.Not my job to defend them, but to be clear did they "give" the ATF anything that they, and their credit card service Authorize.net along with shipper Stamps.com, were not under subpoena for in conjunction with the search warrant and raid conducted on Polymer 80 in 12/2020?
Polymer80 Warrant - Handguns, Customer Records, Prohibited Persons
Polymer80 Warrant - Handguns, Customer Records, Prohibited Persons - The affidavit in support of the Polymer80 warrant application to search for and seize evidence related to the investigation is detained, in part, below.www.thefirearmblog.com
I saw one site that had them in stock, but now requires FFL because they are serialized now.Several sites have them in stock
One of which I know ships to MA and will stuff the same box with a cheap lower parts kit for an extra $34
100%The 2A community is quick to call someone out for giving in. When they have no skin in the game and it is not you going behind bars or losing your home. Yet, companies like Black Rifle Coffee is still in business and still giving money to our enemies.
Place that I was referring to added the caveat that they have to ship parts kits separately and can't sell jigs.I saw one site that had them in stock, but now requires FFL because they are serialized now.
I believe 5D Tactical still sells their 80% lower but you have to purchase the jig with rails as a separate item added to cart but still shipped on one order. They still sell the 80% AR lowers too.Place that I was referring to added the caveat that they have to ship parts kits separately and can't sell jigs.
What's insane is the price on jigs
I believe I have all of his videos downloaded. PM me and I can try to email them to you if you want.I was racking my brain earlier trying to think of that guy's channel name. I remember watching those videos a while ago, I wish I'd downloaded them, they were really good.
Anyone built up one of the GST-9 Mod-1? How's the quality?
I have done a couple of them. I like them more than the P80’s (did a few of those). I think they are easier to do especially the area where the recoils spring assembly goes. The only reason why I did more P80 was that I bought them for $69 each. I did get my GST-9 for less than they are going now but still not as low as the P80’sAnyone built up one of the GST-9 Mod-1? How's the quality?
There is a remedy.The bureaucratic f***ing the people are subject to in this country goes well beyond guns. Lifetime deep staters sit behind their desks writing rules to control the populace with zero accountability (they are not elected). This is not what the founders intended. Hopefully SCOTUS will continue to chip away at issues like this (EPA ruling on emissions at power plants). I'm not holding my breath, though.