mikelawtown
NES Member
Nice as i said at NESR....I'm torn between another BAD Lever or Tactical Link
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
AR-15 thread... I'll show you mine if you show me yours.
- Thread starter LoginName
- Start date
Yeah, I know it was a joke but maybe you aren't familiar with Fortis. You don't exactly get a budget build with them. Not surprised he's waiting on sights. It's my favorite rail next to Diamondhead.
BillyBoy
NES Member
I wasn't planning on making it a budget build. I just decided to put the AR together, take a break and then buy some BUIS/red dot.
Budget, no budget, doesn't matter. Its damn nice! Love the fortis rail, its a rugged lite rail. Nice build.
Edited to keep this a arpic thread.
18" Noveske Switchblock build i did a couple years ago, but added an fde fixed carbine stock. Have not shot it yet with the stock but it feels comfortable and no issue looking through the eotech setup. Had a full sized ACE skeleton stock on it prior.
Edited to keep this a arpic thread.
18" Noveske Switchblock build i did a couple years ago, but added an fde fixed carbine stock. Have not shot it yet with the stock but it feels comfortable and no issue looking through the eotech setup. Had a full sized ACE skeleton stock on it prior.
Last edited:
Dip Dungles
NES Member
Windham with magpul furniture. Waiting on a fixed magpul stock and can't decide on a sight yet.
After an 11 month wait the stamp finally arrived! I'll be taking her out tomorrow for testing.
LAR Grizzly lower w/ KNS pins and JP trigger group
Magpul B.A.D. lever
Aero upper
Magpul MOE stock
Hogue Grip
Magpul MBUS Pro sights
BCM Ambi Charging Handle MOD A44
10.3" 1/7 CL 5.56 barrel
Samson Evo 10" rail
YHM Phantom QD Flash hider (For YHM 7.62ti suppressor when that stamp arrives in 8 months![[frown]](/xen/styles/default/xenforo/smilies.vb/003.gif "Frown [frown]")
)
Viking Tactical sling
LAR Grizzly lower w/ KNS pins and JP trigger group
Magpul B.A.D. lever
Aero upper
Magpul MOE stock
Hogue Grip
Magpul MBUS Pro sights
BCM Ambi Charging Handle MOD A44
10.3" 1/7 CL 5.56 barrel
Samson Evo 10" rail
YHM Phantom QD Flash hider (For YHM 7.62ti suppressor when that stamp arrives in 8 months
)Viking Tactical sling
Budget, no budget, doesn't matter. Its damn nice! Love the fortis rail, its a rugged lite rail. Nice build.
Edited to keep this a arpic thread.
18" Noveske Switchblock build i did a couple years ago, but added an fde fixed carbine stock. Have not shot it yet with the stock but it feels comfortable and no issue looking through the eotech setup. Had a full sized ACE skeleton stock on it prior.
I finally got an EOTech for Christmas for my Rock River lower and Adams Arms upper that I built a few years ago
Love the Gen II Noveske lower. Really pissed that they're discontinued. I'm eyeing a lower on GunBroker, but I'm not sure I feel like spending $260....
Finally done. Budget "SPR" esque build.
All in with optic, under $1000. Built it over the course of the last year.
All in with optic, under $1000. Built it over the course of the last year.
chinalfr
NES Member
You can find chainsaw Gen 2 all over the net for $220. Mine was a chainsaw. Really can't find any flaw on it. I love noveske, especially the parts that sprinkles.
Sent from my Tinfoil hat
LWRC SPR Mod-0 16"
Trijicon SRS
Vickers Sling
Troy BUIS
BCM Gunfighter Ambi charging handle
Troy Modular forward grip
flintoid
Banned
how is that SRS? You likey?
Haven't been able to test at the range yet. It's an extremely nice piece of kit with a small 1.75 moa red dot and 10 brightness settings, I'm sure target acquisition is going to be fast even at long distances. It's kind of heavy but extremely robust, i can't imagine i won't like it after using it. I Love Trijicon quality.
Parker Duofold
NES Member
New AR build complete and test fired
I completed this build in mid-December 2013 but just got the chance to take it to the range early this morning and run some rounds through it. 60 rounds of .223 brass (PMC) on a cold morning with no problems. Had the scope zeroed in at 100 yards in about 6 or 7 shots. Runs great! I am hoping that the LOP on this build is going to be OK for my 11 year old grandson. My other ARs are setup for adult shooters. This will be better for him.
Upper and lower receiver - Matrix Aerospace http://www.matrixaero.com/
Complete Mass. compliant (muzzle device) 16" barrel assembly - Windham Weaponry
BCG - Windham Weaponry
Furniture - Magpul in FDE. Fixed carbine stock.
Trigger / FCG - Palmetto State Armory
Forward assist - Palmetto State Armory
Optic - inexpensive NCStar 4X32 "tactical sniper scope"
Magazine - Thermold preban
I completed this build in mid-December 2013 but just got the chance to take it to the range early this morning and run some rounds through it. 60 rounds of .223 brass (PMC) on a cold morning with no problems. Had the scope zeroed in at 100 yards in about 6 or 7 shots. Runs great! I am hoping that the LOP on this build is going to be OK for my 11 year old grandson. My other ARs are setup for adult shooters. This will be better for him.
Upper and lower receiver - Matrix Aerospace http://www.matrixaero.com/
Complete Mass. compliant (muzzle device) 16" barrel assembly - Windham Weaponry
BCG - Windham Weaponry
Furniture - Magpul in FDE. Fixed carbine stock.
Trigger / FCG - Palmetto State Armory
Forward assist - Palmetto State Armory
Optic - inexpensive NCStar 4X32 "tactical sniper scope"
Magazine - Thermold preban
Last edited:
71montess
NES Member
That looks great ! 20" barrel ?
Attachments
![[laugh2]](/xen/styles/default/xenforo/smilies.vb/014.gif "Laugh at above [laugh2]")
71montess
NES Member
What , he did a good job, hope his grandson likes it.
I completely agree with the fact that the rifle looks great, and he did a good job. I was "not sure if serious" regarding your "20 inch barrel" comment.
mikelawtown
NES Member
was that range in lawrence? also what comp is on it? hard to see
mikelawtown
NES Member
Budget, no budget, doesn't matter. Its damn nice! Love the fortis rail, its a rugged lite rail. Nice build.
Edited to keep this a arpic thread.
18" Noveske Switchblock build i did a couple years ago, but added an fde fixed carbine stock. Have not shot it yet with the stock but it feels comfortable and no issue looking through the eotech setup. Had a full sized ACE skeleton stock on it prior.
Is the Magpul stocks collar the wrong one? I think you use that 1 when using an ASAP sling mount. View attachment 90309View attachment 90310
71montess
NES Member
Sorry, looks like a carbine, just looked at the barrel and it looked loooooong from the angle of the picks I guess
Parker Duofold
NES Member
It's a 16" barrel. This one: http://www.windhamweaponry.com/shopexd.asp?id=183&bc=no#axzz2paXJRmhP
The comp is this one: http://www.windhamweaponry.com/shopdisplayproducts.asp?Search=Yes&sppp=10&page=1&Keyword=compensator&category=all&highprice=0&lowprice=0&allwords=compensator&exact=&atleast=&without=&cprice=&searchfields=#axzz2paXJRmhP
The range is at HSA in Hopkinton, MA
Last edited:
mikelawtown
NES Member
FDE Nike's i have to see them now....
![]](/xen/proxy.php?image=http%3A%2F%2Fcdn.solecollector.com%2Fmedia%2Fsneakers%2Fimages%2FNike-SB-Zoom-Stefan-Janoski-Light-British-Tan-02.jpg%5Bimg%2F%5D&hash=b5023a4e99bc681f1ade8216711993f8)
mikelawtown
NES Member
Thought those rests looked familiar!
My turn ![[smile]](/xen/styles/default/xenforo/smilies.vb/001.gif "Smile [smile]")
Thanks NES for the wealth of information and some good laughs..
First Build and it came up great no problems doing it plus not a single scratch on the lower or upper ... well Not like it would it make any difference.
View attachment 91064
In case you are wondering Yes I am using a small brass tube as punch![[wink]](/xen/styles/default/xenforo/smilies.vb/002.gif "Wink [wink]")
It works and only cost me $1.50 for a 2 feet long rod ![[grin]](/xen/styles/default/xenforo/smilies.vb/041.gif "Grin [grin]")
so if anyone want a cheap Brass punch let me know ![[rofl]](/xen/styles/default/xenforo/smilies.vb/013.gif "ROFL [rofl]")
I can mail you one I made 8 so take it as a Karma first came first serve.
Thanks .
Thanks NES for the wealth of information and some good laughs..First Build and it came up great no problems doing it plus not a single scratch on the lower or upper ... well Not like it would it make any difference.
View attachment 91064
In case you are wondering Yes I am using a small brass tube as punch
It works and only cost me $1.50 for a 2 feet long rod so if anyone want a cheap Brass punch let me know I can mail you one I made 8 so take it as a Karma first came first serve.Thanks .
