Mike, If you're looking for the UBR good luck, they are very hard to find right now. As a matter of fact Magpul is having a hard time keeping up with the demand for a lot of their products.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
AR-15 thread... I'll show you mine if you show me yours.
- Thread starter LoginName
- Start date
Mike, If you're looking for the UBR good luck, they are very hard to find right now. As a matter of fact Magpul is having a hard time keeping up with the demand for a lot of their products.
I can call up the local shop by me and ask if they have any in stock, also, get on BCM's email notification for them.
- Joined
- Aug 17, 2009
- Messages
- 60
- Likes
- 1
My new baby...
Pre-Ban AR-15 converted to M-4
Need a better CCO though...just ordered a higher mount for it for the time being. Whatcha think?
Pre-Ban AR-15 converted to M-4
Need a better CCO though...just ordered a higher mount for it for the time being. Whatcha think?
Build in progress (mostly done now)
Current equipment:
S&W M&P15 Lower Receiver
Yankee Hill Machine Black Diamond rifle-length upper half with Diamond free-floating handguard and low profile gas block.
Magpul MIAD grip
Bushmaster A2 stock
LaRue Tactical LT-104 QD Optics mount
Bushnell Elite 3200 10x40mm scope with mil-dot reticle
Magpul XTM rail covers
Promag Foward Vertical Grip
Midwest Industries Sling Swivel adapter
Harris 9-12" Bipod
Blackhawk Nylon Sling
Colt 20 round magazine
DPMS LPK
YHM BCG
Rock River 2-stage match trigger kit
Planned:
Either MI SPLP sights or Troy Battlesights (leaning towards the former)
My AR-15 Collection.
Good stuff, at some point I will finish mine.
W
wolf223
another update: DPMS Carbine - my only AR for now ![[smile]](/xen/styles/default/xenforo/smilies.vb/001.gif "Smile [smile]")
in progress... I haven't even shot it yet.![[hmmm]](/xen/styles/default/xenforo/smilies.vb/009.gif "Hmm [hmmm]")
post ban, black hawk sling, Aimpoint bla bla bla
in progress... I haven't even shot it yet.
post ban, black hawk sling, Aimpoint bla bla bla
George D
NES Member
S&W Lower, Colt sock, Olympic Arms upper, sourced from NES classifieds. Now contemplating optics. Oh, and my toe.
Last edited:
W
wolf223
![[grin]](/xen/styles/default/xenforo/smilies.vb/041.gif "Grin [grin]")
George D
NES Member
Sorry, here is my Colt sock.
It has a S&W in it right now but I can assure you its a pre-ban Colt sock.
Last edited:
S&W Lower, Colt sock, Olympic Arms upper, sourced from NES classifieds. Now contemplating optics. Oh, and my toe.
Don't sweat it... ChetD left his tri-pod leg in the first pic.
Range trip today to sight it in and check my build results and its a success. I just really need a red dot with some BUIS and a sling to make this build complete.
-S&W M&P15
-Fulton Armory LPK with KNS pins
-Sully Stock (fixed carbine length)
-Command Arms pistol grip with interchangeable finger grooves and backstraps
-POF piston driven upper reciever. 18" floated and fluted heavy barrel. Single piece aluminum accessory rail.
-Trijicon TA31RCO Acog mounted on CG&G quick detatchable mount.
-ARMS 40L low profile BUIS
-Fab Defensive Line fore-grip bi-pod. This was the best find in my build. I found it at Botachtical.com for $89.95 (+$10 S&H). I see it in stores and other websites listed for $130. http://www.botachtactical.com/fabtpod.html
I had a few hard choices and compromises to make. The option to go with the Sully carbine length stock was necessary to achieve proper eye relief with the Acog mounted forward of the BUIS . That causes a sharp recoil that makes fast follow-up shots more difficult. I plan on trying a hydraulic buffer to see if I can smooth out the recoil a little.
If I had it to do over again, I would order the POF upper with regular handguards. The only thing I want mounted to the front is the grip/bipod. I could have saved $200 and some weight on the front end. The mono-rail also raises the sights about 3/8" which throws the Acog's BDC out of whack a little bit. If I make a shorter build in the future I will use the rail on that and throw some regular handguards on my current AR.
Last edited:
W
wolf223
nice!
I have one. I like the fact that you can fit a 30rd mag in them when fully extended too!
![[wink]](/xen/styles/default/xenforo/smilies.vb/002.gif "Wink [wink]")
I have one. I like the fact that you can fit a 30rd mag in them when fully extended too!
Range trip today to sight it in and check my build results and its a success. I just really need a red dot with some BUIS and a sling to make this build complete.
... And the milsurp guru turns to the dark side
![[crying]](/xen/styles/default/xenforo/smilies.vb/006.gif "Crying [crying]")
W
wolf223
looks great! what back up iron is that?
i have a A.R.M.S # 40 and i'm thinking of switching it out...
![[thinking]](/xen/styles/default/xenforo/smilies.vb/010.gif "Thinking [thinking]")
the 1/3 "low" co-witness is NOT sitting right with me and I have fixed front sight / gas block....
oh and what model aim point?
My A1 clone, finally
Last edited:
here is my first AR, just got it the other day. Its a stag model 3, with promag flip up sights. I bought a couple 30 round mags as well.
Nice choice on the Stag. I picked one up for my second AR and it has operated nicely thus far.
good to hear. Its still unfired. I need to join another club because mine only has a pistol range. Gonna be a few weeks before I have the $ to join one, so just holding it and getting familiar for now.
radioman
NES Member
Finally done after three months of sourcing parts.
Nice AR. What's the info on that bad Larry?
I apologize for the craptastic photos...
I've finally built my dream AR.
Specs:
Eagle Arms (Armalite) 5.56 Preban Lower
LWRC M6A2 Piston Upper w/14.7" Barrel and Permanently Attached A2 Flash Hider
Eotech XPS2-0
Magpul MBUS
Magpul MOE Collapsible Stock
Magpul MIAD Grip
Magpul rail furniture
Tango Down Quick Detach Stubby Vertical Grip
DPMS LPK
I've finally built my dream AR.
Specs:
Eagle Arms (Armalite) 5.56 Preban Lower
LWRC M6A2 Piston Upper w/14.7" Barrel and Permanently Attached A2 Flash Hider
Eotech XPS2-0
Magpul MBUS
Magpul MOE Collapsible Stock
Magpul MIAD Grip
Magpul rail furniture
Tango Down Quick Detach Stubby Vertical Grip
DPMS LPK
Last edited:
My A1 clone, finally
Need details! This looks a lot like what I might like to do some day. See retro AR: help put together shopping list
(Though I need to admit, that EOTech Hanwei has looks real nice.)
Last edited:
I apologize for the craptastic photos...
I've finally built my dream AR.
Specs:
Eagle Arms (Armalite) 5.56 Preban Lower
LWRC M6A2 Piston Upper w/14.7" Barrel and Permanently Attached A2 Flash Hider
Eotech XPS2-0
Magpul MBUS
Magpul MOE Collapsible Stock
Magpul MIAD Grip
Magpul rail furniture
Tango Down Quick Detach Stubby Vertical Grip
DPMS LPK
http://i234.photobucket.com/albums/ee160/hhsieh/LWRC M6A2 PreBan/IMG_6873.jpg
http://i234.photobucket.com/albums/ee160/hhsieh/LWRC M6A2 PreBan/IMG_6878.jpg
http://i234.photobucket.com/albums/ee160/hhsieh/LWRC M6A2 PreBan/IMG_6876.jpg
http://i234.photobucket.com/albums/ee160/hhsieh/LWRC M6A2 PreBan/IMG_6881.jpg
http://i234.photobucket.com/albums/ee160/hhsieh/LWRC M6A2 PreBan/IMG_6890.jpg
Now that is one nice stick. Outstanding job!
