Patriot
NES Member
I think I'm OK on the 30-30 for the time being. I traded for a bunch of it with different folks.
I'm looking for .32 Win Spl at this time. Thanks for the offer.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
-
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
The Brass Trading Thread
- Thread starter EddieCoyle
- Start date
- Status
I think I'm OK on the 30-30 for the time being. I traded for a bunch of it with different folks.
I'm looking for .32 Win Spl at this time. Thanks for the offer.
I have once fire brass in:
84 270wsm
82 30/06
49 308 fc
40 30/30
1000 223 mix L/C and Rem
9 7mm08
5 375 h&h mag
2 300 win mag
1 303 british
Clean and mostly all are winchester. NO dark brass
trade for 44 mag and 357 mag brass
thanks
Rick
84 270wsm
82 30/06
49 308 fc
40 30/30
1000 223 mix L/C and Rem
9 7mm08
5 375 h&h mag
2 300 win mag
1 303 british
Clean and mostly all are winchester. NO dark brass
trade for 44 mag and 357 mag brass
thanks
Rick
Last edited:
OK this is what I have:
69 once fired 357 SIG shells. Winchester headstamp in foam trays
30 (actually 31, but one of em is nickle, not sure if it's reloadable) mixed headstamp .45 ACP (these are from a bulk box of ultramax remanufactured ammo, so we'll call em twice fired)
What I need:
9mm luger once fired
.223 once fired
anything a first time reloader would need such as bullet trays, hand primers, bullet pullers, anything u have laying around that you dont use anymore. (i'll only be reloading 9mm and .223)
69 once fired 357 SIG shells. Winchester headstamp in foam trays
30 (actually 31, but one of em is nickle, not sure if it's reloadable) mixed headstamp .45 ACP (these are from a bulk box of ultramax remanufactured ammo, so we'll call em twice fired)
What I need:
9mm luger once fired
.223 once fired
anything a first time reloader would need such as bullet trays, hand primers, bullet pullers, anything u have laying around that you dont use anymore. (i'll only be reloading 9mm and .223)
Last edited:
I have 270 Win brass, and need 44 mag.
Would do 1:2
Would do 1:2
![[laugh]](/xen/styles/default/xenforo/smilies.vb/012.gif "Laugh [laugh]")
Needing .44 mag and 357 mag cases. Will trade for linotype or pure lead.
Hi Duke!
I have about 60 357 mag cases. Range pickups. If you are interested, PM me your mail address and I will send them up to you.
I'm not looking for anything in return.
I can bring you some tomorrow AM. If you still have my number, call me and I'll stop by. We'll work something out...... If you don't still have my number, then send me a PM, and I'll give it to you again.
I wanna pick your brain about refinishing a stock.....
I wanna pick your brain about refinishing a stock.....
I know he's probably the best to ask, but I've refinished a couple stocks with good results so far just incase you need a secondary opinion
I'm not going to completely refinish. Just have some dings and scratches that need to get repaired.
I know he's VERY good with wood.
I know he's VERY good with wood.
Have some 7mm Rem Mag that I will trade for 44 mag or 500 S&W mag (gotta start collecting some).
Also, will trade Lake City once fired 5.56 brass for .500 S&W mag brass.
Also, will trade Lake City once fired 5.56 brass for .500 S&W mag brass.
7.63mm Mannlicher, 7.65 French Longe, .30 Pedersen
I could use the following reloadable brass: 7.63mm Mannlicher, 7.65 French Longe, .30 Pedersen
If anyone has quantities of this that they would like to sell or trade for it would be a big help.
I have large amounts of 9mm, .45, .223, .30-06 as well an doo dads of all kinds.
I could use the following reloadable brass: 7.63mm Mannlicher, 7.65 French Longe, .30 Pedersen
If anyone has quantities of this that they would like to sell or trade for it would be a big help.
I have large amounts of 9mm, .45, .223, .30-06 as well an doo dads of all kinds.
GONE. Traded with Fixxah, while he's here in Maine.
I have at least one Yellow Bucket FULL of Federal NT .45 ACP brass.
These are the ones with the smaller primer (small pistol primer).
I don't have a 45 ACP gun, or else I would just load them myself. I know that they work fine!
I have to use the regular full size primers in my reloading class, so I have been sorting these out from those.
I don't need lead (haha) but would swap these 45 ACP small primer brass pcs in some reasonable % for 9mm or .308 or 30-06 or 357 mag or 44 rem mag or 500 S&W mag.
Otherwise, they go to the scrap metal dealer.
I have at least one Yellow Bucket FULL of Federal NT .45 ACP brass.
These are the ones with the smaller primer (small pistol primer).
I don't have a 45 ACP gun, or else I would just load them myself. I know that they work fine!
I have to use the regular full size primers in my reloading class, so I have been sorting these out from those.
I don't need lead (haha) but would swap these 45 ACP small primer brass pcs in some reasonable % for 9mm or .308 or 30-06 or 357 mag or 44 rem mag or 500 S&W mag.
Otherwise, they go to the scrap metal dealer.
Last edited:
What other brass could you use? That is some rare stuff you need there. I could use some 30-06 commercial 1x brass...gots a good amount to trade.
As some of you have noticed in one of my threads, I'm rechambering a SACM M1935a for a custom caliber. For this gun it's going to be a cut down .30 Carbine (cut to .780 long & reamed for a 94 gr .32 cal bullet). A close approximation to the original 7.65 French Long (or .30 Pedersen). I have a very limited supply of .30 carbine brass (maybe 30 rounds). I would like to trade for some of those if some one has it.
I could trade for equal amounts of:
.223
.40 S&W
9mm
.45
Thanks
I could trade for equal amounts of:
.223
.40 S&W
9mm
.45
Thanks
Patriot,you can make 32 Win Spl from 30/30 brass if you didn't know.
- Status
