replacement rear peep for RRA NM sight

[mac1911]

Ok so RRA only offers 36,40 and .050" rear peep sight
well I see cobwebs in the. 040 I was given a .052 which I use but I'm not liking how big it is. Trying to find replacements that fit the rra been a pita. I would like to try a .046.
Any leads on where to get ones that fit? I believe the threads are 1/4 28

 

[Wildweasel]

http://www.bjonessights.com/AR15.html I remember them from when I built my NM gun 10 years ago. No experience with them .

 

[PatMcD]

Bushmaster or White Oak take the same inserts, I think. Call and ask before you order, though.

 

[PatMcD]

I'm wrong.

RR uses a different thread than everybody else.
Two options:
1. Re-tap the hole in the leaf for WOA inserts.
2. Buy a set of fine drill bits and re-hole your inserts.

 

[beldavius]

When I was at Perry a couple years ago, the creator of the microsite was there and I had him do an alignment on mine. At the time he asked me how it worked and if there was anything else. I told him I wished the aperture were just a bit bigger and he took it out and used a fine drill bit as Pat suggested to enlarge the hole. It's been perfect ever since. I would say that's probably the cheapest solution.

 

[mac1911]

Yeah, im just getting lazy. Its go buy a drill bit close to the size and drill out my .040 for 4-8 bucks or just buy one...

thanks all... drilling out the small one, what can go wrong its already no good to me...