Boghog1
NES Member
So the G19 thread got me to pull my glock back out and I'm curious what others have done to make them tolerable without dropping $250 on a $500 gun?
Brief history, had the gun for years and hated the serrated trigger so swapped the factory 19 shoe and trigger bar for a factory 17 shoe and trigger bar, better but still a pretty heavy trigger ran that for a few years, swapped to a dot or minus, was much better, ran that for a bit and opted to get a RDS, I think this is strictly coincidence but the pull weight has creeped up, put a lagoon sticker control device on and could get the slide off, sent to Langdon he found a burr somewhere and fixed it, a few hundred rounds later same issue, I pulled it apart found a burr on the connector, cleaned it and worked for a few hundred rounds, and that is where I'm at again.
Brief history, had the gun for years and hated the serrated trigger so swapped the factory 19 shoe and trigger bar for a factory 17 shoe and trigger bar, better but still a pretty heavy trigger ran that for a few years, swapped to a dot or minus, was much better, ran that for a bit and opted to get a RDS, I think this is strictly coincidence but the pull weight has creeped up, put a lagoon sticker control device on and could get the slide off, sent to Langdon he found a burr somewhere and fixed it, a few hundred rounds later same issue, I pulled it apart found a burr on the connector, cleaned it and worked for a few hundred rounds, and that is where I'm at again.