38ExtraSpecial
NES Member
Usually 9mm is a little smaller. .355 or .356Can I use 9mm bullets for .38spl and .357mag? All three are the same diameter, right? But not sure about length.
38/357 wants a .357 jacketed or .358 cast usually
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
Usually 9mm is a little smaller. .355 or .356Can I use 9mm bullets for .38spl and .357mag? All three are the same diameter, right? But not sure about length.
You could try a couple but they might tumble in the larger bore.I have .356 Ibejiheads
Agreemhere...the accuracy will likely be dog doo...You could try a couple but they might tumble in the larger bore.
You could try a couple but they might tumble in the larger bore.
Yup. And I’m not sure how well the bullet/neck tension will be with an undersized bullet.Agreemhere...the accuracy will likely be dog doo...
That. And if the bullets are lead undersized won't be good.You could try a couple but they might tumble in the larger bore.
I have one of those.Can’t find primers might as well tell stupid kid story’. My buddy Bruce and I are being dumb ass kids around in my basement. Looking for something to do I open a drawer and pull out a metal toolbox. In it is my old mans gun cleaning kit and a handful of .38 rounds . Now comes the ingenious idea to yank the lead bullets out to see what’s inside. We put the cartridge in a small bench vise and manage with a pair of needle nose vise grips to unseat one. Feeling like we conquered nuclear physics we do 3 or 4 more . So Bruce decided it’s time to see if we can light this powder in a small pile with a stick match. Yup it lights!!!!!! I look at him and he had no eyebrows left and his face is singed a might. Needless to say my father was none to happy with either of us .
Haven’t seen any there lately. They will tell you over the phone if you call.Anyone happen to know what Shooters has in stock?
could be. That would be entertaining, but no not this time.You messing with me
Can I use 9mm bullets for .38spl and .357mag? All three are the same diameter, right? But not sure about length.
Build a snow pile and shoot into it with all of your firearms. Come spring, pick up all of the unmolested bullets off the ground and mic them to see your barrel dimensions.Can I use 9mm bullets for .38spl and .357mag? All three are the same diameter, right? But not sure about length.
Plenty of powders dropped tonight at our fav seller. picked up another 8lb jug of 4064. I am now set on my 8mm powder
I guess I have to stop being productive and just sit by the computer more often