It's time to think about a permanent place do built, clean and tinker with my firearms. Cleaning rifles on a cold, concrete basement floor is not my idea of fun. I decided to built a bench that is a full 30 inches deep and 96 inches wide. The back of it will be peg board so that I have a place to store some tools. It will also have a shelf for additional storage. I used Google Sketchup to design the bench. Hopefully someone will find this handy.
Materials list and cut list:
13 2'x4'x96"
(1 cut 96" repeat 4 times)
(1 cut 55", 1 cut 27" repeat 3 times)
(3 cuts 27" repeat 5 times)
(2 cuts 27" repeat 1 time)
3 4'x4'x96"
(2 cuts 40" repeat 3 times)
1 4'x8'x3/4" plywood
(1 cut 31 1/2"x96", 1 cut 30"x96" - notch out to fit around 4x4 vertical supports)
2 2'x4'x1/4" peg board
24 3/8"x6" lag bolts
48 washers for lag bolts
24 3/8" nuts
24 3/8" lock washers
1 box of 3" deck screws
Materials list and cut list:
13 2'x4'x96"
(1 cut 96" repeat 4 times)
(1 cut 55", 1 cut 27" repeat 3 times)
(3 cuts 27" repeat 5 times)
(2 cuts 27" repeat 1 time)
3 4'x4'x96"
(2 cuts 40" repeat 3 times)
1 4'x8'x3/4" plywood
(1 cut 31 1/2"x96", 1 cut 30"x96" - notch out to fit around 4x4 vertical supports)
2 2'x4'x1/4" peg board
24 3/8"x6" lag bolts
48 washers for lag bolts
24 3/8" nuts
24 3/8" lock washers
1 box of 3" deck screws
Last edited: