Brain trust

[jkelly1229]

Alright Im building a p80 frame 19

Bought a psa dagger complete slide kit

Had my 19 frame ready to rock

Lost one of the stupid trigger pins included with p80s lpk

I also have a 17 frame that is complete

And i go huh that color green would look dope on the blue frame what if i 19x'd this b

Chop the frame but the recoil spring sticks out too far. Everything else looks fine

Cant rack the slide and if i push back the guide rod sticks out

Is there a new recoil spring i need to order for an xframe on p80's or am i special in the bad way

Also... how easy is it to remove the metal plate

 

[Broc]

 

[Bodhisattva]

Should probably stay away from the Jazz Cabbage when building P80s…..

 

[Mesatchornug]

17 and 19 have different internal dimensions. Can't do that like with the 320s.

 

[Boghog1]

You can chop the grip on a G17 to G19 height but you cannot shorten the length of a G17 to to use a G19 Slide

ETA: I would love to see a G45 p80

 

[jkelly1229]

You can chop the grip on a G17 to G19 height but you cannot shorten the length of a G17 to to use a G19 Slide

ETA: I would love to see a G45 p80

They have them it's a thing. I'm thinking i just need a 26 guide rod length

 

[Mesatchornug]

They have them it's a thing. I'm thinking i just need a 26 guide rod length

Do yourself a favor. Align the backs of both frames and look at them from the top. Do the same with the slides (looking from the bottom).

You'll see that the mechanical bits are different lengths. This should prevent complete cycling, even without a spring.

 

[Sparky1911]

Looks terrible anyway

 

[jkelly1229]

Do yourself a favor. Align the backs of both frames and look at them from the top. Do the same with the slides (looking from the bottom).

You'll see that the mechanical bits are different lengths. This should prevent complete cycling, even without a spring.

It cycles fine i took the spring and barrel out and it slides back and forth no issue

 

[jkelly1229]

Looks terrible anyway

Your opinion lol

 

[Quantavious G]

bag the arts and crafts project and just go buy a G22.

 

[Mesatchornug]

It cycles fine i took the spring and barrel out and it slides back and forth no issue

Does it feed and extract rounds from the magazine?

 

[Rick O'Shea]

Start over, as that looks like crap.

 

[Marty McFly]

Start over, as that looks like crap.

I'm sure it's not the final product as far as look goes. He hasn't even added an electrical tape grip yet.

 

[jkelly1229]

Does it feed and extract rounds from the magazine?

Idk i kinda need the guide rod situated to hold up the barrel

 

[Rick O'Shea]

I understand the Dagger to be "Compatible with Gen3 Glock components". Does the upper fit another frame? I would want to get another running gun to swap parts out and find the differences.

 

[oldguy68]

Sell it here on the classifieds for a couple grand.
Then go buy a real Glock.

For Sale: New Folbert type Glock 19 1/2, totally custom. Worth twice what I payed for it.Taran Testical super match carbon copy.
I know what I have, no low bidders! Two thousand buckaroos, green backs only. No checks.

I will follow all the laws I used to acquire said flobert and will follow these laws of the lands of the lakes.

 

[Bodhisattva]

Looks terrible anyway

Yup

Your opinion lol

And several others

 

[jkelly1229]

Does it feed and extract rounds from the magazine?

I see what you mean now... thats weird i thought glocks were just chopped down versions of each other

 

[Rick O'Shea]

Join the Gen 1 Club,... lol

 

[scott-o]

You going to sand and polish that front square cut? Looks...rough. lol.

 

[Mesatchornug]

I see what you mean now... thats weird i thought glocks were just chopped down versions of each other

I had thought so, too. Did some research, and learned that they had to tweak the slide rails to make the 17 into the 19

 

[pastera]

You can chop the grip on a G17 to G19 height but you cannot shorten the length of a G17 to to use a G19 Slide

ETA: I would love to see a G45 p80

Frames | Print Your 2A

printable glock compatible frames, AR receivers, Mossberg receivers and misc parts

www.printyour2a.com

 

[Mesatchornug]

Frames | Print Your 2A

printable glock compatible frames, AR receivers, Mossberg receivers and misc parts

www.printyour2a.com

I had also found a company that makes a mix and match 80% frame that replaced the backstrap and mag well with an extended version, so your g19 becomes a g45. I don't care enough to search for it right now...