If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
They have conversion kits for glock 20s to turn your 20 into a 16 in carbine. Also if you have the coin hk made a few thousand ump 45s in 10mm talk about a cure for ed.
Can folks offer some advice on options for a 10mm AR? I think there are options out there but haven't looked recently. I think it's a dedicated build. Glock mags?
HK also made a 10mm MP5. I'm not sure if they have them for the civilian market though. I was lucky enough to fire one an FBI agent had on the range some years back. Single shot and 2 round burst. Total awesomeness
Sent from my iPhone using Tapatalk
You can get MP5 clones chambered in 10mm or 40, the issue is trying to find pre-ban mags for them if you are in MA.
I believe Mechtech makes a kit to turn your 1911/Glock 20 into a carbine.
olympic makes one as well. people trash them but the only problems i had with my 9mm olympic was with the mags. it used old school sten mags and even with a dedicated hahn block the mags were just too much of a pain in the ass.
http://www.midwayusa.com/product/76...3-upper-receiver-assembly-10mm-auto-16-barrel
out of stock, but they're out there. MA folks out of luck though as that's a 18 round mag.
Thanks for the responses. Whatever I do, I plan to Glitterfy it...
So it looks like I can get the Quarter Circle lower that takes Glock mags. And then Ron at RMW Extreme is making 10mm DI uppers. There seems to be some back and forth over DI vs. blowback and unclear to me which is better but Ron seems to have his DI design working well in the pistol calibers. Anyone know off-hand what standard capacity 10mm pre-ban mags are out there? Have to admit that the neutered mags look pretty dumpy in an AR, but you already knew that. As for the grease gun mags, how do folks feel about having them pinned/altered to be limited to 10 rounds or are there ample pre-ban mags out there?
Clarifying -- what pre-ban Glock 10mm mags are out there? And what do folks think about GG mags?
HK also made a 10mm MP5. I'm not sure if they have them for the civilian market though. I was lucky enough to fire one an FBI agent had on the range some years back. Single shot and 2 round burst. Total awesomeness
Sent from my iPhone using Tapatalk
He sent me a prototype blow back bolt for 45 to chop up for a bullpup build I have on the back burner .Update: Madmachinist (aka Rudy at Macon Armory) is planning a 10mm DI upper and mag adapter. He's trying to perfect it before it goes to market. I didn't ask for an ETA. Currently Macon offers a .45 upper w/mag adapter. Nice thing about this product is that it does not require a dedicated lower. The upper is easy. It's getting a mag adapter that will feed reliably that has been the challenge but sounds like they are close.
Is multiple round burst feature considered a machine gun/NFA Class III?
Don't know anything about 10mm ARs being a thing, but that's the only pistol caliber carbine that sounds appealing to me. If you let me choose between using a 16" AR (5.56) for home defense or a 16" 10mm AR with hot ammo, I'd take the 10mm. Real, hot 10mm from a long barrel is nasty stuff. Nearly AR energy with much higher power factor.
I would go with 460 Rowland . If you don't know what it is . It's like 45 on roids or 10mm vs 40.