Wanted to rent/borrow: Sight pusher for M&P

[Sprocket]

I'm having a hard time getting the OEM front sight off the slide. If someone has a sight pusher they'd be willing to lend or rent, I'd appreciate it.

I'm on the North Shore and can travel if needed. PM or post up here

Thanks

 

[Cloverleaf Firearms Group]

I'm having a hard time getting the OEM front sight off the slide. If someone has a sight pusher they'd be willing to lend or rent, I'd appreciate it.

I'm on the North Shore and can travel if needed. PM or post up here

Thanks

I have an M&P MGW pusher. I can just mail it to you, or meet up if you are ever in Worcester area brother. I'll also have that other info tonight that you were asking about earlier.

 

[Another_David]

small flat punch and hammer. support the slide with a towel and put some masking tape on the punch to help keep it from scratching. If you have a vice, wrap the slide in a towel and put it in the vice but don't over-tighten the jaws or you can warp the slide.

knock left to right--towards the ejection port.

think of it as brass and flying out the right side--that my a little visualization technique to help remember which way to knock it.

 

[eisenhow]

Is this an M&P Pro or L 5"? If so the MGW won't work.

 

[Sprocket]

It's a standard M&P - Thanks Stu, I'll ping you the mailing addy

Left to right - Gotcha, thanks