Modifying preban uzi mags for AR9 colt lower

Kgordon4

NES Member
Joined
Jan 14, 2024
Messages
32
Likes
15
Feedback: 6 / 0 / 0
looking for some help with modifying my preban uzi mags to work with my spike’s tactical AR9 colt lower. Anyone do this in the Worcester MA area preferably?
 
Get your "WECSOG" in gear and just do it! There's barefoot, pajama wearing third world ragheads making entire working guns over campfires. Surely you can make a simple measured cut in an existing magazine.

You don't need a mill, you can use a Dremel, a file a scribe and an accurate measuring device.

I've done a few by hand and they worked fine.
 
Get your "WECSOG" in gear and just do it! There's barefoot, pajama wearing third world ragheads making entire working guns over campfires. Surely you can make a simple measured cut in an existing magazine.
You don't need a mill, you can use a Dremel, a file a scribe and an accurate measuring device.
I've done a few by hand and they worked fine.
👆This. There isn't much to the process.
No reason to be nervous about screwing up, milsurp "ok/good condition" mags run about ten bucks each.
 
Back
Top Bottom