This could be my newest acquisition, anyone have one, shot one? Opinions? I hear the trigger is much better than the G19.
CZ P-10 C - CZ-USA
CZ P-10 C - CZ-USA
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
I've watched the videos and the pistol is slightly bigger than a G19 but fits in G19 holsters. Looks interesting and the price is right.There are new compact and full size models almost out, fyi.
In Mass not worth the trade off of no prebans imo, but the smaller model might be interesting.
Could be an early Xmas present to me.Trigger is awesome. Clean break, and pronounced wall. Reset is also equally as good. Picture getting a Glock from the factory with a good trigger already installed. That’s pretty much the cz p10. Also I enjoy the streamline like feel compared to the Glock 19. Front serrations are a plus too. All in all it is essentially a thinner Glock 19 with front slide serrations, and a good trigger. If you want one go for it you won’t regret it.
I bought a CZ75B and a P-01 Omega this past summer so my CZ collection could be growing.Haha do it man. The sights are pretty good too made of metal and not polymer. The glow on them doesn’t last too long though.
Very nice, I brought it to a NH Guns and Ammo and had Nick to a full Cajun Gun Works job in it. Trigger job, sights, etc.Oh a 75b eh? been wanting one of those myself. How are they?
what's wrong w/the mag release?The magazine release is hot garbage. Otherwise I'd rather have it than the two p320s I have now....
The magazine release is hot garbage. Otherwise I'd rather have it than the two p320s I have now....
Sounds expensive hahaVery nice, I brought it to a NH Guns and Ammo and had Nick to a full Cajun Gun Works job in it. Trigger job, sights, etc.
The last few P10-Cs I pressed the mag release on, it was almost like it was stuck. The amount of force required to get it to release was horrendous. It was probably something that could be fixed with some polishing, but not something you should have to do to a brand new gun. Some were better than others but all way too much resistance.
The releases on the other CZ pistols are fine... its just the P10.... they may have fixed this by now, though... I can't imagine anyone not bitching
about it as originally deployed.
-Mike
The mag release is pretty stiff. Some polishing will fix it. However it never really bothered me I just thought of it as a better fail safe Incase you hit the release on accident.
Ahh that must be why I don’t mind it. I’m neither elderly or weak handedIt's still way too tough, lol.. its a 500% failsafe? It's bad enough that I wouldn't want to work that release in a rush, I'll put it that way. Even with a full gun flip, it was tough. Anyone elderly or with minimal hand strength can almost forget about it.
-Mike
The last few P10-Cs I pressed the mag release on, it was almost like it was stuck. The amount of force required to get it to release was horrendous. It was probably something that could be fixed with some polishing, but not something you should have to do to a brand new gun. Some were better than others but all way too much resistance.
The releases on the other CZ pistols are fine... its just the P10.... they may have fixed this by now, though... I can't imagine anyone not bitching
about it as originally deployed.
-Mike
The new models of the P10 (full size and S model) look like they have a redesigned mag release.
Damn"Sounds expensive haha"
$606.0/Cajun Pro package,barrel bushing,truglo TFX sights, polish job, new recoil spring.
I was on the CZ website and don't see the S, where do you see this model?The P10C is a fine gun and I am looking forward to the p10S. Out of the box it is prob one of the nicest striker triggers out there and depending on your sight preferences the stock gun is outstanding.
I have two and the mag release and slide lock on the first needed to be broken in pretty signifigantly the second was fine. As it relates the mag release, the catch on the mag body can be a little sharp and a couple strokes of fine sandpaper makes the release work better.
Yech. It looks like its lost the CZ 75s ultra low bore axis. What gives??
Yech. It looks like its lost the CZ 75s ultra low bore axis. What gives??
It's still pretty low, not far from Glock, frankly
.. I think it's just an artifact of it being a polymer framed striker fired gun.... Not many are ultra low.....
where did you get these pics?
It's been announced, I dont know when it's shipping.