In my effort to not pay 400$ to agency arms , i bought a 30 dollar wood burner kit, 20 dollars worth of sand paper up to 1000 grit. And will be buying one of those retractable straight edge razors for paint scraping to make my lines perfectly straight. Saw that little hint on pullman arms vid, and will need some plain old masking tape to tape off lines. Dremel tool will be borrowed from from a really good friend who if he likes thos enough, i will do his for free in return
Come with me on my journey as i post pics, update with news etc
So i started by hand with sandpaper , first time is the hardest lol.
Got down as far as i could till i run the dremel on it later on.
Did 220, 320, 400, and a tad bit of 800 to see what it feels like surface wise.
Will even it all out later , just too much material to remove by hand at the moment on the front and back
http://s000.tinyupload.com/download.php?file_id=85636124179782713335&t=8563612417978271333573383
- - - Updated - - -
http://s000.tinyupload.com/download.php?file_id=85636124179782713335&t=8563612417978271333573383
Come with me on my journey as i post pics, update with news etc
So i started by hand with sandpaper , first time is the hardest lol.
Got down as far as i could till i run the dremel on it later on.
Did 220, 320, 400, and a tad bit of 800 to see what it feels like surface wise.
Will even it all out later , just too much material to remove by hand at the moment on the front and back
http://s000.tinyupload.com/download.php?file_id=85636124179782713335&t=8563612417978271333573383
- - - Updated - - -
http://s000.tinyupload.com/download.php?file_id=85636124179782713335&t=8563612417978271333573383