I just bought a CZ52 and don't want to have to load another caliber - especially a necked pistol cartridge.
Does anyone make a 9mm barrel for it?
Does anyone make a 9mm barrel for it?
Last edited:
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
Be sure to enter the NES/MFS May Giveaway ***Canik METE SFX***
AFAIK the Winchester Metric Handgun ammo is imported from Czechoslovakia. I've heard it's made by S&B.S&B is good. Winchester is good and very clean...
I ended up getting a 9mm barrel for $50 and swapping it in. It was an easy mod, the whole thing took about 10 minutes. I reused the rollers, cam, and pin from the 7.62 barrel.
Now I need to get to work on the trigger...
Where'd you wind up getting the barrel? And what kind of 9mm do you plan on using?
Yes, range report, please. I would imagine that one should only use std. pressure 115gr 9mm in this gun. Would be interested to know if it prefers FMJ only or would also eat JHPs.
Yes, range report, please. I would imagine that one should only use std. pressure 115gr 9mm in this gun. Would be interested to know if it prefers FMJ only or would also eat JHPs.
Now I need to get to work on the trigger...
Jim, If you figure out a way to ease that trigger pull, let me know what you did. The trigger slap on my CZ is the worst I ever felt.
Also, if you get a chance, PM me the site you got the bbl from. Might be something to try.
Thanks
Any modifications to the mags?
I've done some work on the action of my CZ-52 to greatly reduce trigger slap. There still may be a little bit but it's mostly gone.Jim, If you figure out a way to ease that trigger pull, let me know what you did. The trigger slap on my CZ is the worst I ever felt.
Also, if you get a chance, PM me the site you got the bbl from. Might be something to try.
Thanks
My next step is to replace the pin, plunger and spring with the Harrington competition pin from Markov.com.