Poking around Castboolits.com on powder coating bullets I figured give it a shot. So off to Harbor Frieght for pc,Rubbermaid bowl and a toaster oven from Walmart and airsoft bbs from Dick's. Took 1 teaspoon pc,bbs and placed them in the bowl shook the contents for a couple of minutes to coat the bbs. The bullets I was coating were 9 mm 130 hp cast. Placed the bullets in the bb/pc mix and shook for 1 min,removed the coated bullets and baked at 400 degrees for 15 min. Sized as I would normally size but no wax lube. Took a batch I had loaded up to the range yesterday and other than being a little light on the powder charge they work fine with one big advantage virtually no smoke.
Anyone firing cast bullets at an indoor range knows what I'mean talking about here. Shortly I'm going down in the cellar to cast some more bullets,powder coat and bake. I've some 45 200 gr swc ammo loaded I'mgoing to try in the near future as well.
Anyone firing cast bullets at an indoor range knows what I'mean talking about here. Shortly I'm going down in the cellar to cast some more bullets,powder coat and bake. I've some 45 200 gr swc ammo loaded I'mgoing to try in the near future as well.