- Joined
- Sep 20, 2013
- Messages
- 60
- Likes
- 30
Over the last 11 years I have been buying guns on a fairly regular basis; 165 handguns alone, including 54 1911 style pistols. Two days ago I went to my local gun shop and picked up my latest - the Jim Clark Sr. Shreveport, LA marked long-slide .38 Special Wad Cutter Bulls-eye gun that began life as a 1968 built .38 Super Colt. The gun was built in August, 1968 so without proof I suspect that the gun was bought new to be converted by Jim Clark.
A note about the Clark, Dinan, and Harpe guns: Greg Derr explained why the barrel bushings are so tightly fit and hard to remove, even with a wrench. Greg said the bushings were normally not intended to be removed; that the barrel was meant to be cleaned from the muzzle end!
I gathered all the other bulls-eye guns that I have and took some photos this evening; please have a look see:
Jim Clark Sr. long slide .38 Special midrange wad cutter gun with short Bo-Mar rear sight rib/sight
Possibly an Alton Dinan built .38 Special wad cutter gun; barrel bushing marked Dinan, front and rear grip stippled; full length BoMar rail and rear sight. Many of the guns that Dinan built had two holes in the front sight - according to Greg Derr all Al Dinan had to do to see who was shooting his guns in competition was look down along the firing line and see those front sights! Mine doesn't have the holes in the sight.
Probably a Jesse Harpe .45 acp hardball gun; both the barrel bushing and main spring housing are marked with Harpe's logo; notice how thick the barrel bushing is; you need a wrench to remove it.
Unknown gun smith Colt .38 Super from 1952; re-nickelled; rear sight is marked U.S. and Triangle; originally a .45 acp pistol the gun also came with the complete .45 acp upper including the correct ejector. It shoots a lot better in .38 Super then in .45 acp
Smith and Wesson Model 52-1 "Master"; .38 Special wad cutter gun; complete with box, manual, 5 magazines; very nice shooting pistol.
Rear sights of all 5 guns.
Thanks for looking!
A note about the Clark, Dinan, and Harpe guns: Greg Derr explained why the barrel bushings are so tightly fit and hard to remove, even with a wrench. Greg said the bushings were normally not intended to be removed; that the barrel was meant to be cleaned from the muzzle end!
I gathered all the other bulls-eye guns that I have and took some photos this evening; please have a look see:
Jim Clark Sr. long slide .38 Special midrange wad cutter gun with short Bo-Mar rear sight rib/sight
Possibly an Alton Dinan built .38 Special wad cutter gun; barrel bushing marked Dinan, front and rear grip stippled; full length BoMar rail and rear sight. Many of the guns that Dinan built had two holes in the front sight - according to Greg Derr all Al Dinan had to do to see who was shooting his guns in competition was look down along the firing line and see those front sights! Mine doesn't have the holes in the sight.
Probably a Jesse Harpe .45 acp hardball gun; both the barrel bushing and main spring housing are marked with Harpe's logo; notice how thick the barrel bushing is; you need a wrench to remove it.
Unknown gun smith Colt .38 Super from 1952; re-nickelled; rear sight is marked U.S. and Triangle; originally a .45 acp pistol the gun also came with the complete .45 acp upper including the correct ejector. It shoots a lot better in .38 Super then in .45 acp
Smith and Wesson Model 52-1 "Master"; .38 Special wad cutter gun; complete with box, manual, 5 magazines; very nice shooting pistol.
Rear sights of all 5 guns.
Thanks for looking!