Glock Guru's lend me your ears (or eyes i guess)

[groundscrapers]

I need some help locating a few parts for my second gen glock 19. I would like to get the glock factory parts for the extended mag release, extended slide release and 3.5# trigger pull connector.

I have seen these for the same generation glock 17 but I wasn't sure if these are interchangible. I appreciate the help

 

[JimB]

could brownells help you?????

 

[fencer]

Try Glock

 

[snwbrdr435]

topglock?

 

[groundscrapers]

I was on brownells last night and I was banging my head against my desk just trying to find the slide release lol.

 

[groundscrapers]

topglock?

They sell it for the 3rd gen and newer 19's but not for the 2 pin second gen.

 

[jenlynn724]

Midway.. Those parts are interchangeable, I believe..

 

[groundscrapers]

Midway.. Those parts are interchangeable, I believe..

Thats what I was looking to confirm more then anything.

 

[whatluck]

The 17/19/22/23/26/27 parts are all interchangeable.

 

[jenlynn724]

Thats what I was looking to confirm more then anything.

OK, consider it confirmed

 

[wolf223]

http://www.allglock.com/

http://www.ghostinc.com/

http://glockstore.com/

if you do some cross referencing, you'll find that the majority of the parts are interchangeable. once you confirm, order the part from the cheapest website if you can't find it locally.

(i.e. midway is usally cheapest).

if it helps, do a google search for the unoffical glock armorers manual too.

 

[cevtv]

glockparts.com

 

[Lopro]

Midway.. Those parts are interchangeable, I believe..

+1 just did that for a G22 http://www.glockfaq.com/

 

[Underwhere]

The mag release is interchangeable.
The extended slide stop lever may not be. It depends on whether you have a 2 pin or a 3 pin setup. You can simply look at your gun to determine that.

The Glock factory 3.5# connectors is not readily available. If you can find a place that sells them they will be pretty expensive. Other manufacturer's produce them but I've found after buying many of them that they often don't perform like the Glock connector.

Glock 3 pin extended slide stop
http://www.midwayusa.com/viewproduct/?productnumber=799965

Glock 2 pin extended slide stop
http://www.midwayusa.com/viewproduct/?productnumber=864587

3 pin vs 2 pin

 

[wolf223]

i have 2 pin, 3rd Glock 17 so i also suggest an early observation.

+1 to Underwhere

 

[Reptile]

3.5# connector- now called 4.5# connector.

http://www.glockmeister.com/45-Pound-Stock-Connector/productinfo/G721/

Out of luck for a G19 2 pin extended slide stop lever--- see bold letters--- http://www.glockmeister.com/Extended-Slide-Stop-Lever-For-Most-2-Pin-GLOCK-Models/productinfo/G7489/

Only for 17's NOT 19's.

I have been very happy shopping at Glockmeister. They can get me stuff faster than Glock can.

 

[Business End Customs]

PM me. I believe I have those parts in stock for a 3 pin..

 

[groundscrapers]

I have a 2 pin second gen and I saw that same link as you did reptile.

 

[Reptile]

I have a 2 pin second gen and I saw that same link as you did reptile.

I wonder if there ever was a 2 pin version of an extended slide stop lever for a Glock 19?

 

[RichM]

I ordered these from glockmeister.com

---------------------------------------------------------------------------
ITEM# DESCRIPTION QTY TOTAL
---------------------------------------------------------------------------
G1981 Mag Catch Factory Extended For 9mm, .401 $3.00

---------------------------------------------------------------------------
GMEXTSL Glockmeister Extended Slide Lock For Al1 $10.00

---------------------------------------------------------------------------
G7489 Extended Slide Stop Lever For Most 2 Pi1 $17.00


for my Gen 2 G17 (2-pin)

G7489 description: GLOCK OEM factory extended slide stop lever for most 2 pin GLOCK Models. Fits the following 2 pin GLOCK Models: 17, 17L, and 34 (1986 to mid-2002). Does not fit the 2 pin G19.

PLEASE NOTE: 2 PIN GLOCK MODELS REFERS TO GLOCK PISTOLS THAT HAVE ONE PIN ABOVE THE TRIGGER AND ONE PIN IN THE REAR OF THE FRAME


ETA: Sorry, reading comprehension FAIL tonight... I saw G19, and read G17. Nothing to see here... move along now folks...

 

[01SVTvert]

IIRC there is a specific 2 pin slide stop for the 17 because the original 2 pin 17s are designed differently than the two pin 19s. The PN: SP07496 works correctly on a 2 pin model 19.

The extended slide stop designed for most 9mms should fit your pistol. The original 2 pin g17s use a different slide stop as it has a "pyramid" spike sticking out of it due to design differences in the old 17s.

You can see the "pyramid" slightly to the right above the pin hole in the pic in the link: http://www.glockmeister.com/Extended-Slide-Stop-Lever-For-Most-2-Pin-GLOCK-Models/productinfo/G7489/

Also, if you do buy the wrong one that has the pyramid on it you can alter the part to fit other pistols by cutting off the pyramid and making sure the area is cleaned up properly.

Good luck

 

[groundscrapers]

Thanks everyone. Happy thanksgiving.