Posted February 29, 2020
Posted February 29, 2020
Update as of 4/1 - Thanks for everyone who has sent my brass to process, I appreciate your business. I'm no longer offering the introductory discount and the cost is now reflective of my standard. But feel free to contact me about periodic special pricing. I'll post pricing updates and discounts from time to time.
Service - what I provide for each case (.223 only for now)
Sized to 0 on Moe’s gauge
Trimmed to 1.750
De-primed and primer pocket swaged
SS pin wet wash
Dry tumbled in corn cob and polish with a corrosion inhibitor (Nu-Finish)
Chamfered and de-burred case neck
Flash hole de-burred
Process
Clean in mass tumbler to get the grime off
Lube and let dry overnight
Run the machine
De-prime, size, trim, swage, expand neck
30 minutes in corn/walnut to get the lube off
Stainless steel pin wet wash and dry
Back into tumbler with corncob and polish - final polish and corrosion inhibitor
Chamfer and de-burr neck on Gracy
De-burr flash hole from the inside
Inspect by hand, each case.
Ship
Cost
7.5 cents ($0.075) per piece. Shipping both ways is paid for by customer.
Notices
Measurements: There will be variations in measurements of brass, especially with different head stamps and number of firings. I strive to keep as much consistency as possible. I will not return any brass that I would not personally shoot at a major event.
Time: Contact me first and I’ll give you a processing time frame pending queue and availability. Targeting 4 weeks or sooner to return to customer.
Special requests: Let me know if you have any special requests
Case prep: I don’t use a small base die.
Best practices:
Separate your brass best you can before you ship it to me by head stamp or # of firings to help maintain consistency per batch.
Contact me at loves beer 99 at hot mail dot com