I've stuck more than a few with OneShot. I've almost given up on it, but have found that it works reasonably well if I follow this.
Clean the sizing die with something like brake cleaner and a patch. When it's dry, give the die a squirt with OneShot after you shake it up. Spray the cases with one shot, make sure to get all four sides. Wait for the one shot carrier to evaporate a minute or two.
I've been reasonably happy with this process and have not had any problems.
B
Clean the sizing die with something like brake cleaner and a patch. When it's dry, give the die a squirt with OneShot after you shake it up. Spray the cases with one shot, make sure to get all four sides. Wait for the one shot carrier to evaporate a minute or two.
I've been reasonably happy with this process and have not had any problems.
B