Looking for engraving service in Northeast Mass

[eyebrowski]

I have a few lowers that I would like to have engraved with SNs. Are there any recommendations for this service in the northeast / Merrimack Valley?

 

[clampett]

I think @EddieCoyle does engraving at the mill in Littleton.

 

[The Herd]

I think @EddieCoyle does engraving at the mill in Littleton.

What Jed said

 

[E.Stoner]

I think @EddieCoyle does engraving at the mill in Littleton.

This.

 

[tinhorn]

Yup. Very pleased with the work he did for me.

 

[not new guy]

He’s the best bet, hands down. Easy to work with and great quality work.

 

[Tartakovsky]

One more for @EddieCoyle. He’s lasered a bunch of SBRs for me. He uses a SALE (San Antonio Laser) and is very methodical, accurate and has incredibly high attention to detail, and I majored in Graphic Design if that counts for anything. His markings look better than factory.

 

[Asaltweapon]

This.

That

 

[maritz01]

Jacks Machine Company
162 Industrial Blvd
Hanson Ma 02341

(781) 447-9264

 

[LuvDog]

I'd head to the mill and talk to @EddieCoyle
But I think Custom Laser Engraving and Cutting might be worth contacting since they might be close

 

[FalArAk]

NES really needs geography lessons lol

 

[Picton]

NES really needs geography lessons lol

What are you saying? Littleton IS "northeast."

...of Worcester.

To be fair, it's not far away from the Merrimack (by my standards). But it's not what the OP asked for.

 

[reveille]

why would you want to put a serial number on it? i assume its an 80 percent lower

 

[Matt_SERE]

NES really needs geography lessons lol

However, Ma**h***s need to learn to drive more than 15 minutes to get something. Once you are outside of 128 loop driving an hour for a product/service is not an oddity.

 

[FalArAk]

What are you saying? Littleton IS "northeast."

...of Worcester.

To be fair, it's not far away from the Merrimack (by my standards). But it's not what the OP asked for.

Littleton NH???;!!!

OMG, WE NEED A RULING!

Mr Coyle does great work, would travel.

 

[FalArAk]

However, Ma**h***s need to learn to drive more than 15 minutes to get something. Once you are outside of 128 loop driving an hour for a product/service is not an oddity.

True, but NES does need to learn geography. It's like:

" Hey stuck in Nashua for an hour looking for a quick bite to eat"

NES : Nordic Lodge in RI.

 

[Picton]

True, but NES does need to learn geography. It's like:

" Hey stuck in Nashua for an hour looking for a quick bite to eat"

NES : Nordic Lodge in RI.

We do that about all sorts of things, though, to be fair.

"So I'm getting into CAS. Vaquero? Or Cimarron?"

NES: Glock.

 

[EddieCoyle]

Littleton isn't that far from where the OP specified.

The OP said "Merrimack Valley". Here's a map of the MA portion of the MV from Wikipedia:

https://upload.wikimedia.org/wikipedia/commons/c/c1/Merrimack_Valley_Map.PNG

Here's the same map showing Littleton in green:

 

[Warm_Garand]

If you don't mind travelling to NH, 2A Engraving seems like a squared-away shop.

Custom Laser Engraving and Cutting

Google Map for directions:

240 Old Nottingham Road, Epping, New Hampshire

You can work in a trip to SIG, Shooters Outpost, and Kittery Trading Post all in the same road trip.

Call ahead, and he'll do it while you wait.

 

[Broc]

What are you saying? Littleton IS "northeast."

...of Worcester.

To be fair, it's not far away from the Merrimack (by my standards). But it's not what the OP asked for.

I thought it was a shot at the guy that posted HANSON.

 

[Broc]

We do that about all sorts of things, though, to be fair.

"So I'm getting into CAS. Vaquero? Or Cimarron?"

NES: Glock.

What bro?

 

[FalArAk]

I thought it was a shot at the guy that posted HANSON.

Ya, Hanson kinda threw me on a wtf loop that was kinda hard to crawl out of lol

 

[DW357]

If you don't mind travelling to NH, 2A Engraving seems like a squared-away shop.

Custom Laser Engraving and Cutting

Google Map for directions:

240 Old Nottingham Road, Epping, New Hampshire

You can work in a trip to SIG, Shooters Outpost, and Kittery Trading Post all in the same road trip.

Call ahead, and he'll do it while you wait.

This is who I used a few years ago. Great dude. Works for Aero Precision

 

[maritz01]

Ya, Hanson kinda threw me on a wtf loop that was kinda hard to crawl out of lol

So shoot me for posting about a good shop that offers the service out of the requested area. Who’s to say that the other shops were not available and god forbid you have to travel out of the 128 beltway.

 

[CatSnoutSoup]

This is who I used a few years ago. Great dude. Works for Aero Precision

Actually I believe his day job is at Sig Sauer.

 

[SBrackett]

This is who I used a few years ago. Great dude. Works for Aero Precision

+1

 

[Asaltweapon]

So shoot me for posting about a good shop that offers the service out of the requested area. Who’s to say that the other shops were not available and god forbid you have to travel out of the 128 beltway.

Having used Jacks it was more than just a little out of the way for NE Massachusetts.

 

[DW357]

Actually I believe his day job is at Sig Sauer.

He must have changed jobs recently. I used him in spring 2020 and he said he was a compliance officer for Aero.

Looking at his LinkedIn page it looks like he was an ATF compliance officer for Caracal USA - which I believe was the parent company for Aero.

https://www.linkedin.com/in/tony-bourgoine-64037a97

 

[CatSnoutSoup]

He must have changed jobs recently. I used him in spring 2020 and he said he was a compliance officer for Aero.

Looking at his LinkedIn page it looks like he was an ATF compliance officer for Caracal USA - which I believe was the parent company for Aero.

https://www.linkedin.com/in/tony-bourgoine-64037a97

My mistake it sounds like, the compliance officer part I do remember, this was a few years ago.