Just pulled the trigger on a Hornady LnL Progressive and $$$$$$ worth of crap to get going for .308. I'll get some .45 dies later cause I already have way more of that than I'm going to shoot this year. I'm hoping to skip the whole swage/trim madness by buying prepped LC brass for the first go-around (with reamed primer pockets) and using the RCBS X-Die to control the case length during sizing without having to trim. Does that make any sense?
Why does even the Dillon primer flip tray cost 3x as much as the nearest competitor? Nice racket. I fell for their tumbler anyway.
The press is on backorder but I'm not exactly in a hurry. There's that little detail of the bench I still have to take care of.
Get ready for a parade of stupid questions and a whole lot more
Here's the list o' crap if anybody's interested:
DILLON CM-500 CASE/MEDIA SEPARATOR/SMALL (DP21045)
DILLON CV-500 VIBRATORY CASE CLEANER/SMALL (DP21027)
HORNADY 308 WIN MODIFIED CASE (HRNA308)
HORNADY OAL GA. CURVED AUTO/LEVER ACTION/PUMP (HRNC1550)
HRN CASE NECK BRUSH 30cal (HRN380067)
HRN CHAMFERING/DEBURRING TOOL (HRN050017)
HRN ELECTRONIC SCALE 350 gr CAPACITY .1gr ACCURACY (HRN050103)
HRN ONE-SHOT CASE LUBE 5.5oz AEROSOL 12/CS (HRN9991)
HRN POWDER COP, CHECKS DROPPED POWDER CHARGE (HRN050063)
HRN POWDER MEASURE DRAIN INSERT LOCK-N-LOAD (HRN050125)
HRN POWDER MEASURE RIFLE METERING INSERT L-N-L (HRN050124)
HRN PRESS LOCK-N-LOAD AUTO PROGRESSIVE (HRN095100)
HRN S/P #1: 22-250/243/ 270Win/284/30-06/45ACP... (HRN392601)
KRAUSE "THE ABC's OF RELOADING" 7th ED. 288pg (KRABC7)
LEE 308 WIN FACTORY CRIMP DIE (LEE90823)
LYMAN CASE LENGTH HEAD SPACE GAUGE 308 WIN (LY7832321)
LYMAN RELOADING MANUAL 48th EDITION (LY9817048)
RCBS 308 WIN FL X-DIE SET, S/H #3 (RCBS37812)
RCBS BULLET PULLER POWER PULL (HAMMER TYPE) (RCBS09415)
RCBS PRIMER POCKET BRUSH COMBO w/HANDLE (RCBS09574)
RCBS PRIMER TRAY 2 (RCBS09480)
Why does even the Dillon primer flip tray cost 3x as much as the nearest competitor? Nice racket. I fell for their tumbler anyway.
The press is on backorder but I'm not exactly in a hurry. There's that little detail of the bench I still have to take care of.
Get ready for a parade of stupid questions and a whole lot more
Here's the list o' crap if anybody's interested:
DILLON CM-500 CASE/MEDIA SEPARATOR/SMALL (DP21045)
DILLON CV-500 VIBRATORY CASE CLEANER/SMALL (DP21027)
HORNADY 308 WIN MODIFIED CASE (HRNA308)
HORNADY OAL GA. CURVED AUTO/LEVER ACTION/PUMP (HRNC1550)
HRN CASE NECK BRUSH 30cal (HRN380067)
HRN CHAMFERING/DEBURRING TOOL (HRN050017)
HRN ELECTRONIC SCALE 350 gr CAPACITY .1gr ACCURACY (HRN050103)
HRN ONE-SHOT CASE LUBE 5.5oz AEROSOL 12/CS (HRN9991)
HRN POWDER COP, CHECKS DROPPED POWDER CHARGE (HRN050063)
HRN POWDER MEASURE DRAIN INSERT LOCK-N-LOAD (HRN050125)
HRN POWDER MEASURE RIFLE METERING INSERT L-N-L (HRN050124)
HRN PRESS LOCK-N-LOAD AUTO PROGRESSIVE (HRN095100)
HRN S/P #1: 22-250/243/ 270Win/284/30-06/45ACP... (HRN392601)
KRAUSE "THE ABC's OF RELOADING" 7th ED. 288pg (KRABC7)
LEE 308 WIN FACTORY CRIMP DIE (LEE90823)
LYMAN CASE LENGTH HEAD SPACE GAUGE 308 WIN (LY7832321)
LYMAN RELOADING MANUAL 48th EDITION (LY9817048)
RCBS 308 WIN FL X-DIE SET, S/H #3 (RCBS37812)
RCBS BULLET PULLER POWER PULL (HAMMER TYPE) (RCBS09415)
RCBS PRIMER POCKET BRUSH COMBO w/HANDLE (RCBS09574)
RCBS PRIMER TRAY 2 (RCBS09480)