Automatic weapons in CT

Joined
Nov 15, 2009
Messages
18
Likes
1
Location
Connecticut
Feedback: 0 / 0 / 0
At my local range they allow automatic weapons which are legally owned. My question is what is the process in Connecticut to own an automatic weapon? Like what steps do you have to take to get one?
 
Find a Class 3 Dealer..Fill out the State/Federal paperwork...I believe there is yearly fee to the state too..

Best bet is to just contact a Class 3 Dealer..there is no license or anything though in CT for a machine gun though..


http://www.cga.ct.gov/2009/pub/Chap943.htm#Sec53-202.htm

Sec. 53-202. Machine guns. (a) As used in this section: (1) "Machine gun" shall apply to and include a weapon of any description, loaded or unloaded, which shoots, is designed to shoot or can be readily restored to shoot automatically more than one projectile, without manual reloading, by a single function of the trigger, and shall also include any part or combination of parts designed for use in converting a weapon into a machine gun and any combination of parts from which a machine gun can be assembled if such parts are in the possession of or under the control of a person. (2) "Crime of violence" shall apply to and include any of the following-named crimes or an attempt to commit any of the same: Murder, manslaughter, kidnapping, sexual assault and sexual assault with a firearm, assault in the first or second degree, robbery, burglary, larceny and riot in the first degree. (3) "Projectile" means any size bullet that when affixed to any cartridge case may be propelled through the bore of a machine gun.

(b) Any person who possesses or uses a machine gun in the perpetration or attempted perpetration of a crime of violence shall be imprisoned not less than ten years nor more than twenty years.

(c) Any person who possesses or uses a machine gun for an offensive or aggressive purpose shall be fined not more than one thousand dollars or imprisoned not less than five years nor more than ten years or be both fined and imprisoned.

(d) The possession or use of a machine gun shall be presumed to be for an offensive or aggressive purpose: (1) When the machine gun is on premises not owned or rented, for bona fide permanent residence or business occupancy, by the person in whose possession the machine gun was found; or (2) when in the possession of, or used by, an unnaturalized foreign-born person, or a person who has been convicted of a crime of violence in any state or federal court of record of the United States of America, its territories or insular possessions; or (3) when the machine gun is of the kind described in subsection (g) hereof and has not been registered as therein required; or (4) when empty or loaded projectiles of any caliber which have been or are susceptible of use in the machine gun are found in the immediate vicinity thereof.

(e) The presence of a machine gun in any room, boat or vehicle shall be presumptive evidence of the possession or use of the machine gun by each person occupying such room, boat or vehicle.

(f) Each manufacturer shall keep a register of all machine guns manufactured or handled by the manufacturer. Such register shall show the model and serial number, and the date of manufacture, sale, loan, gift, delivery or receipt, of each machine gun, the name, address and occupation of the person to whom the machine gun was sold, loaned, given or delivered, or from whom it was received and the purpose for which it was acquired by the person to whom the machine gun was sold, loaned, given or delivered. Upon demand, any manufacturer shall permit any marshal or police officer to inspect such manufacturer's entire stock of machine guns, and parts and supplies therefor, and shall produce the register, herein required, for inspection. Any person who violates any provision of this subsection shall be fined not more than two thousand dollars.

(g) Each machine gun in this state adapted to use projectiles of any caliber shall be registered in the office of the Commissioner of Public Safety within twenty-four hours after its acquisition and, thereafter, annually, on July first. Blanks for registration shall be prepared by said commissioner and furnished upon application. To comply with this subsection, the application as filed shall show the model and serial number of the gun, the name, address and occupation of the person in possession, and from whom and the purpose for which the gun was acquired. The registration data shall not be subject to inspection by the public. Any person who fails to register any gun as required hereby shall be presumed to possess the same for an offensive or aggressive purpose. The provisions of this subsection shall not apply to any machine gun which has been registered under the provisions of subsection (f) and which is still in the actual possession of the manufacturer.

(h) No provision of this section shall apply to: (1) The manufacture of machine guns for sale or transfer to the United States government, to any state, territory or possession of the United States or to any political subdivision thereof or to the District of Columbia; (2) the possession of a machine gun rendered inoperable by welding of all critical functioning parts and possessed as a curiosity, ornament or keepsake; or (3) a machine gun acquired, transferred or possessed in accordance with the National Firearms Act, as amended, provided such machine gun shall be subject to the provisions of subsection (g) of this section.
 
Last edited:
Only thing that is CT specific is that the machine gun must be full auto only, you fill out the little registration card for DPS, and I'd get an authorization number for transfer of machine gun with barrel less than 12". The ATF procedure - 2 fingerprint cards, 2 Form 4s completed, citizenship form, $200 check. Takes awhile but it isn’t difficult at all (if you can get form 4s signed off by police chief or other authorized official).
 
BigC,
My advice to you is to go visit a local Class 3 dealer. I use Newington Gun Exchange in Newington, CT. There are more of them around than you would think.

They will shepherd you through the process and make sure everything is done legally. I wouldn't worry about details. Thats what you will be paying them the transfer fee for. (Although you are ultimately responsible for yourself, you will have 3-4 months to read up on the laws while you wait for your form 4 to be approved by the feds.

Remember though, that you can buy the gun from anywhere. That includes on Gunbroker, or Sturmgewehr.com.

The downside to buying out of state is that you have to send money a person you don't know, and then wait 3 months for the fed to approve the transfer to your local Class 3 dealer.

If you buy in state, it is a little less stressful.
 
If you decide to make a habit of owning class 3 firearms, you should consider setting up a trust. It frees you from the hassle of fingerprinting and law enforcement signoff. After about 5 class 3 items, I can whip out a form 4 or a form 1 in about 20 minutes. In contrast, it took me a couple of weeks to complete my first form 1.

Don
p.s. A form 1 is what you use to
'make" a class 3 firearm. An example would be if you wanted to register an AR15 receiver as a short barreled rifle
 
Back
Top Bottom