2 Day AR15 Armorer Course

Rating - 0%
0   0   0
Joined
Mar 31, 2019
Messages
3
Likes
0
2 Day AR15 Armorer Course in Livermore Maine on July 13-14. Open enrollment

I am letting everyone know about this event because it is the first time William Larson has brought his renowned armorers course to Maine. It is well worth the drive, even from Mass or NH, because you will be learning a metric ton of hard info about the platform. If anyone has questions that are not answered on his website, you can email me at [email protected]

www.semperparatusarms.com

2 Day Comprehensive AR15 Armorer’s Course
Semper Paratus Arms’ 2 day AR15 Armorer Course is a comprehensive course on the AR15 weapon system. At the completion of this class you will have the skills and knowledge necessary to perform proper assembly/ disassembly, barrelling procedures, perform routine maintenance and inspections. You will have a better understanding of the cycle of operation and how to troubleshoot component problems and keep your weapon operational. Students will also learn about gas port sizing and component specifications.

Most courses are required to be paid through the Semper Paratus Arms website, unless otherwise noted in the description. Law enforcement agencies may contact SPA for invoicing. In the event that a course is cancelled you will receive a complete refund.

Instructor Email: william dot [email protected] dot com

All tools are available from http://www.brownells.com/

In addition to a complete AR15 rifle or carbine you will need the following:
Minimalist Tool List
Glock Disassembly Tool- Glock Disassembly Tool
1″ Nylon/Brass gun smithing hammer. Part# 818-600-100WB- Gunsmithing Hammer
6″ flat tip screwdriver or correct allen wrench/hex bit for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB- Pivot Pin Tool
1/16 flat punch (Starrett is recommended)- 1/16 Punch
Notepad/Paper
USB Flash Drive
 
Rating - 0%
0   0   0
Joined
Mar 31, 2019
Messages
3
Likes
0
Yes that is the correct cost. One benefit to this class is that it is not bound to one manufacturer. You will learn both more theory about the platform, and more hands on assembly/disassembly.
 
Top Bottom