WiFi enabled Endoscope on sale at woot today, March 12 2018

[HarryPottar]

Hi,

I have a coupe of wifi endoscopes I pick up from amazon, this is a 'pro' level you can adjust the LED's and is 1200p, normally they are around 720p. I use mine in my Dillion 650xl, when I prepping rifle brass I have a swager where my primer seater would go, I put the endoscope in the die slot where the powder drop would go. This way I can the inside of the brass while I swage.

Harry

SwissTek Professional HD Wi-Fi Endoscope - $29.99 + $5 standard shipping

 

[jtnf]

8.4mm camera diameter (.331 inches) if anyone is interested. This is the first thing I checked...
Any recommendations for a smaller diameter endoscope? I'd like to be able to scope my 30 cal bores, so 6mm or smaller seems most likely.

 

[Golddiggie]

Too bad the camera diameter is 8.4mm. Won't be usable for most rifles (something I've been thinking of getting one for). It could be used in pistols, of at least 9mm caliber. But, I would think that use case would be rare.

BTW, I've been looking for a good one that will fit down the bore of a .223 rifle for a while. Since if it will work there, it will work in all my firearms.

 

[RImike]

I didn't know what to expect when I opened this thread. I planed for the best yet prepared for the worst...

 

[mac1911]

I like the WiFi idea for keeping one some place for frequent checks. Could set up to check powder drops also.

I have this one that I use on my home PC. Does not work with my phones. Its good enough for my needs for the price.
It will fit in my AR barrels and most 22lr I have except my new KIDD 22lr barrel.
https://www.amazon.com/gp/aw/d/B01IGPDMK0?psc=1&ref=yo_pop_mb_pd_t1

Here's a 76 year old 513t 22lr with camera above. Like to find a better scope in the cheap range that will do 90' view

View: https://youtu.be/HRnw_sawvvI

 

[Sprocket]

It’s not the scope. It’s the cleanings you need to worry about

 

[mac1911]

It’s not the scope. It’s the cleanings you need to worry about

250k logged rounds (previous owner would not give up his log books) after it was bought from perry in the late 60s.
Its as clean as it gets. Holds the 10 ring of a SR target at 200 when I do my part.

 

[doxdsgn]

To see the sides, i/o looking forward/down you need a side mirror adapter. Like these, only better.

https://www.amazon.com/Yunanwa-Supereyes-Borescope-degrees-Endoscope/dp/B00CBKFJ9Y
FYI - maker has tried to simulate a first surface mirror with a chrome sticker. Doesn't/can't work as the reviews read.

Had one for a 7mm borescope that was a second surface mirror. Didn't have much success with it either. May not find a side mirror adapter small enough for .22.

 

[mac1911]

To see the sides, i/o looking forward/down you need a side mirror adapter. Like these, only better.

https://www.amazon.com/Yunanwa-Supereyes-Borescope-degrees-Endoscope/dp/B00CBKFJ9Y
FYI - maker has tried to simulate a first surface mirror with a chrome sticker. Doesn't/can't work as the reviews read.

Had one for a 7mm borescope that was a second surface mirror. Didn't have much success with it either. May not find a side mirror adapter small enough for .22.

The mirrors that came with the scopes I bought sucked.
It fit in the 223 barrel but you could not see anything but the light reflecting back .