H335 Loads Wanted for .223 Rem

[Patriot]

I have a pound of H335 and lots of 2230 so I'm not interested in working up a load
for the 335. I would like to use the powder up so I was interested in what you guys
might be using for a load. I will be shooting a Rem 7.5 Bench Rest Primer, LC or R-P
brass, a 55gr FMJBT bullet and it will be shot out of a Stag 20 inch upper.

Thanks

 

[BIG GUN]

You really should check the manuals but without going down to my shop, around 26grains should do it. That has been the powder of choice by lots of AR folks.

 

[Patriot]

You really should check the manuals but without going down to my shop, around 26grains should do it. That has been the powder of choice by lots of AR folks.

I have. I was interested in your pet loads. Here is my load sheet for .223:

 

[abomb60]

I use 25 grains of H335 with a 55gr FMJBT and it's worked well so far. I haven't had a chance to run it through the chrony yet but it should be around 3000-3100 FPS if my load book is correct.

 

[sieveboy]

25 grains of H335 with 55 gr bullet. Have loaded thousands with this combo.

 

[EddieCoyle]

25 grains of H335 with 55 gr bullet. Have loaded thousands with this combo.

Me too. This is my "standard" 55gr load.

Didi you work up a load for the 2230? I'm interested because it's the only powder I seem to be able to find in quantity. I haven't loaded any with it yet.

 

[Patriot]

Me too. This is my "standard" 55gr load.

Didi you work up a load for the 2230? I'm interested because it's the only powder I seem to be able to find in quantity. I haven't loaded any with it yet.

Not yet. I've been shooting W748 (26.0gr) up to now. Before I shoot my 2230 I plan on
using up the H335 on range fodder, then I can get down to work on the 2230.

 

[DrEvil]

+1 25/55

 

[Knuckle Dragger]

Me too 25gr H335 w/ 55gr FMJBT.

IF all you want to do is 'use up' your H335 I can take if off your hands......

 

[Dick]

25 gr of H335 here as well. I also use 25 gr with AA2230, with equivalent results.

 

[Patriot]

Me too 25gr H335 w/ 55gr FMJBT.

IF all you want to do is 'use up' your H335 I can take if off your hands......

Hi KD,

If you want the powder, you can have it for $23 (my cost). Purchased
in January this year @ FS, so it's very fresh and unopened. Send me a
PM and let me know.

Patriot

 

[Knuckle Dragger]

I was kind of kidding you, but PM sent anyway.