Ghost 2A Cerakote
NES Member
★ I am NOT an FFL, so I am limited with regards to serialized frames and receivers.★
I've been professionally spraying lacquer on kitchen cabinets and furniture for 15 years. The experience I have with previous work really has helped me out with the cerakote work. I have everything I need to apply Cerakote the correct way, according to the book. I've only been applying cerakote for a short time, but I am a perfectionist who takes pride in the work I do.
I started Cerakoting because of countless experiences with very reputable companies. I was so frustrated with all these companies. I will not name shame, but there are a lot of bad companies out there that simply don't care about the quality of the work they are doing and do nothing to fix the functionality issues on expensive projects. I say, if you don't enjoy the work you are doing, don't do it. If you can't produce a quality finish, quit! So I decided if I wanted something done the correct way, I should stop paying all these companies and learn how to just do it myself. Started cerakoting, showed friends, and they instantly wanted their slides done, hence all the MR920 slides besides one (mine). Now cerakoting is something I do really enjoy doing, so I figured, why not offer quality work and stand 100% behind any of the work I do? If you have any questions, feel free to reach out.
Everything will be thoroughly cleaned, soaked in degreaser, gassed out, sandblasted with aluminum oxide at 90 psi (metal) or 40- 50 psi (polymer), coated using the Iwata LPH80, and baked [in a dedicated Cerakote oven] between 150-300 degrees, depending on the series and material, for 1 or 2 hours. Once the project is out of the oven and cool, it is fully 100% cured.
The colors I have on hand currently are E Series FDE, Moss [E Series OD Green], Midnight, Smoke, Titanium, Blackout, H Series Blush, and Graphite Black. The Elite series is far more durable when compared to the H series of Cerakote, but both are better than most finishes and treatments with regards to durability and far superior to ANY other coatings or treatments with regards to rust protection. I WILL NOT OFFER ANY C SERIES AIR DRY, IT IS GARBAGE!!!! The only downsides to the Elite series is that there are fewer color choices, and it does have more sheen to it compared to the H Series. But some colors can be mixed to create more options. I will order any color / series you want [except the air dry C Series].
Most of the work I've done so far has come from friends, Reddit, and Armslist users.
● Project price varies depending on size.
● No job is too small.
● With slides, I will ask for a barrel too, just to ensure proper fitting.
● Will also trade work for 9mm ammo.
● Stencil/camo work will obviously be more expensive.
● Fast turnaround time.
● Payment: cash/zelle/trade.
● The length of projects must be under my 16 inch maximum, as I need sufficient space underneath and above whatever is baking. I have a small lab oven, and I'm currently looking for a bigger oven set-up.
● Location: Worcester county
● I'm seeking to build a more steady client base and get my name out.
● Please let me know if you have any interest.
● Contact thru NES message.
● Goose rules apply!
● Must have green feedback
I've been professionally spraying lacquer on kitchen cabinets and furniture for 15 years. The experience I have with previous work really has helped me out with the cerakote work. I have everything I need to apply Cerakote the correct way, according to the book. I've only been applying cerakote for a short time, but I am a perfectionist who takes pride in the work I do.
I started Cerakoting because of countless experiences with very reputable companies. I was so frustrated with all these companies. I will not name shame, but there are a lot of bad companies out there that simply don't care about the quality of the work they are doing and do nothing to fix the functionality issues on expensive projects. I say, if you don't enjoy the work you are doing, don't do it. If you can't produce a quality finish, quit! So I decided if I wanted something done the correct way, I should stop paying all these companies and learn how to just do it myself. Started cerakoting, showed friends, and they instantly wanted their slides done, hence all the MR920 slides besides one (mine). Now cerakoting is something I do really enjoy doing, so I figured, why not offer quality work and stand 100% behind any of the work I do? If you have any questions, feel free to reach out.
Everything will be thoroughly cleaned, soaked in degreaser, gassed out, sandblasted with aluminum oxide at 90 psi (metal) or 40- 50 psi (polymer), coated using the Iwata LPH80, and baked [in a dedicated Cerakote oven] between 150-300 degrees, depending on the series and material, for 1 or 2 hours. Once the project is out of the oven and cool, it is fully 100% cured.
The colors I have on hand currently are E Series FDE, Moss [E Series OD Green], Midnight, Smoke, Titanium, Blackout, H Series Blush, and Graphite Black. The Elite series is far more durable when compared to the H series of Cerakote, but both are better than most finishes and treatments with regards to durability and far superior to ANY other coatings or treatments with regards to rust protection. I WILL NOT OFFER ANY C SERIES AIR DRY, IT IS GARBAGE!!!! The only downsides to the Elite series is that there are fewer color choices, and it does have more sheen to it compared to the H Series. But some colors can be mixed to create more options. I will order any color / series you want [except the air dry C Series].
Most of the work I've done so far has come from friends, Reddit, and Armslist users.
● Project price varies depending on size.
● No job is too small.
● With slides, I will ask for a barrel too, just to ensure proper fitting.
● Will also trade work for 9mm ammo.
● Stencil/camo work will obviously be more expensive.
● Fast turnaround time.
● Payment: cash/zelle/trade.
● The length of projects must be under my 16 inch maximum, as I need sufficient space underneath and above whatever is baking. I have a small lab oven, and I'm currently looking for a bigger oven set-up.
● Location: Worcester county
● I'm seeking to build a more steady client base and get my name out.
● Please let me know if you have any interest.
● Contact thru NES message.
● Goose rules apply!
● Must have green feedback
Attachments
-
20240215_212011.jpg -
20240215_211545.jpg -
20240210_221236.jpg -
20240210_220848.jpg -
20240210_220656.jpg -
20240201_195925.jpg -
20231214_173747.jpg -
20231214_173738.jpg -
20231214_175325.jpg -
20231214_175541.jpg -
20230929_154947.jpg -
20231008_104148.jpg -
Screenshot_20230927_104019.jpg -
20240115_120850.jpg -
20240216_082127.jpg -
20240221_213449.jpg -
20240222_113355.jpg -
20240222_113947.jpg -
20240229_172859.jpg -
20240308_154147.jpg -
20240308_153226.jpg -
20240308_153409.jpg -
20240308_153731.jpg -
20240315_090712.jpg -
20240317_130933.jpg -
20240327_151121.jpg -
20240403_101456.jpg -
20240407_102925.jpg -
20240407_111258.jpg
Last edited:
️
