Adco EZ-Brite "Wonder Cloth"

[milktree]

I bought some of this years ago. It's now discontinued. I didn't use it often, but when I did it seems to do a damn good job.

So... what's the current hotness for cleaning stainless guns? Specifically getting the schmutz off the front of the cylinder.

 

[jaypap]

Try the "Miracle All Purpose Polishing Cloth". $8.00 to $10.00 online they work very well.

 

[chris_1001]

Cape Cod cloths?

Not sure if the same but they get a lot of thumbs up.

Amazon product ASIN B0017H3PIOView: https://www.amazon.com/Cape-Cod-Polish-Co-Polishing/dp/B0017H3PIO/ref=asc_df_B0017H3PIO/?tag=hyprod-20&linkCode=df0&hvadid=198085753806&hvpos=&hvnetw=g&hvrand=16456362294253720320&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1018127&hvtargid=pla-319275982040&psc=1

 

[roadkillrob]

I use the cape cod ones on my stainless watch and works great!

 

[DW357]

I bought some of this years ago. It's now discontinued. I didn't use it often, but when I did it seems to do a damn good job.

So... what's the current hotness for cleaning stainless guns? Specifically getting the schmutz off the front of the cylinder.

View attachment 756286

All I use for my stainless revolvers
Amazon product ASIN B00AU67BEMView: https://www.amazon.com/Birchwood-Casey-Remover-Polishing-6-Inch/dp/B00AU67BEM/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8

 

[PappyM3]

Cape Cod cloths?

Not sure if the same but they get a lot of thumbs up.

Amazon product ASIN B0017H3PIOView: https://www.amazon.com/Cape-Cod-Polish-Co-Polishing/dp/B0017H3PIO/ref=asc_df_B0017H3PIO/?tag=hyprod-20&linkCode=df0&hvadid=198085753806&hvpos=&hvnetw=g&hvrand=16456362294253720320&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1018127&hvtargid=pla-319275982040&psc=1

That’s used frequently in the watch world. I bet it would be good for stainless guns.

 

[pinefd]

This stuff works great for me, and it's absolutely non-abrasive: C4 CARBON REMOVER | Brownells

Frank

 

[Gus]

Was also a big fan of the ADCO product. Have been using this with good results:

 

[Qwikdraw45]

Get The Lead Out (cleaning tip)

I had a stainless revolver that had a lot of lead staining on the cylinder face and in the forcing cone area. My LeadAway cloth is in storage. Searching around online, I found a suggestion to try a 50/50 mix of white vinegar and (fresh) hydrogen peroxide. I started with a cotton ball that I...

www.northeastshooters.com

Mix some up; wipe it on with a cotton ball or piece of gauze and leave wet for a few minutes. Then scrub off with a cotton ball/gauze soaked in the mixture.

A lot cheaper than the commercial cloths, and easier to get the ingredients/mixed.