The New Reloading Component/Equipment Trading Thread - Please read the first post

EddieCoyle

Consigliere
Moderator
NES Member
Joined
Nov 11, 2005
Messages
21,325
Likes
9,769
Location
Northern, MA
Feedback: 160 / 0 / 0
Let's try this again. There are three simple rules:

  1. To post in here, you must have something to trade. Post only what you have to trade, and what you'd like to get in return. If you want to buy something or sell something outright, please use the Classifieds forum.

  2. Do not post here unless you're posting something to trade. Use PM for any discussion or haggling.

  3. Unlike the last Component trading thread, you can post multiple times in here. Feel free to add a new post when you have something new to trade. Once you trade something, it would be nice if you'd edit your post(s) to indicate that you no longer have the item(s). I'll try to come through here periodically and weed them out.
 
Powders for your MAGNUM rifle:

IMR 7828: 5x 1-lb jugs, factory-sealed
Hodgdon Hybrid 100V Smokeless Powder 3x 1-lb jugs, factory-sealed

Will trade for equal weight of Varget, Benchmark, IMR4895, IMR4064, IMR3031, Win231/HP38, PowerPistol, or H110/Win296, or FFF, or primers.
ETA: will trade 3 of mine for 2 of yours. [grin]
 
Last edited:
i have
1000 cci small magnum pistol primers
63 pieces of 7.62 x 54 R brass
49 pieces of 44 mag brass
about 4 # of 30.06 brass
3 # of 38 special brass
1 # of 357 mag brass
all bras is once fired

i am looking for
small pistil and rifle primers and shot gun 209 primers
 
1000 CCI 550 Smal Pistol Magnum Primers

I grabbed 1000 CCI 550 Small Pistol Magnum Primers mistakenly. I have no idea what the hell I'll do with them in the foreseeable future so they are up for trade or cash.

Make me an offer. I'd love some 45ACP brass. I've been picking up range brass for several months, but it's slow going. I have nowhere near the heap I'd like to have in order to introduce my PC1911 to IDPA.
 
Looking for 6.5x50 jap dies and brass or ammo.

Lots of brass and some powder (see previous posts on this page) to trade for it.

Thanks!

ETA: got the dies. More brass would be ok tho. [grin]
 
Last edited:
I have some:

303 British boxer primed
357 SIG
45 ACP Larger Primer mixed


What I am after....?

30-06 brass PPU or HXP.
 
Last edited:
Looking to swap 1k CCI Large Pistol Magnum for standard CCI Large Pistol primers. Didn't read the box properly when I bought them from Cabela's.
 
I have thousands of pieces of .38 Special brass, both deprimed/cleaned (1000) and still primed/dirty (1200). I have both brass or nickel.

I would trade for:

- small or large pistol primers, or
- 240g 44mag projectiles

PM is best. I am in the Natick area.
 
Last edited:
I have a bunch of once fired:
.223 brass
.38 spl brass
9mm brass

looking for:
6.8 SPC brass
.375 Win brass
6.5 Carcano brass

Manchester, NH area

Sent from my SM-G935P using Tapatalk
 
All of the following is available for trade: updated 2/27/18
1000 plated 45 cal 255gr FP $100
500-600 lead 45 cal 200 grain SWC $45
RCBS 45 dies $40

1000 9mm jacketed bullets RN (maybe 115gr have to check) $90

2 lbs unique and a partial container $40
1 lb 231 $20
1 lb bullseye $20
3/4 lb 2400 $10
3/4 lb No.7 $10

5900 small pistol primers $150 for all

Lee pro 1000, has everything but the powder loader (indexes for 45 and 9mm included with dies) $150
Lee auto bullet loader adapter for press $20
1 set 38 special dies LEE brand $20
1 set of 357 dies LEE brand $20
2 sets of 9mm dies LEE $20 each set
1 set and parts .30 cal dies $20
extra turrets $5ea

Make an offer on the brass
28 lbs of 9mm brass
35 lbs of 556/223 mixed brass
18 lbs 45 brass
4 lbs of 40 S&W brass

Trade for
guns, ammo, other supplies.
 
Last edited:
Location: Taunton

Have:
Dies with original case:
RCBS 14601 FL 30/30 WCF
RCBS 11401 FL 243 Win
RCBS 10601 FL 22/250
RCBS 18606 3-die 44 Mag SWC (w/ 30-40 44 mag cases)​

Lyman 450 sizer die 429 with 241 top punch (in an original Lyman tube)

Ideal 429-244 single cavity mold with handles

9mm mixed - decapped and cleaned in utrasonic cleaner - ~33lbs
45 ACP mixed - decapped and cleaned in utrasonic cleaner - ~20lbs
308 Win once fired (sorted, three headstamps) fully processed - 25+ lbs
308 Win once fired (Aguila) fully processed - 163 rnds
40 S&W - decapped - 3/4 of 3.5 lb coffee container
380 ACP - decapped - 1/2 of 3.5 lb coffee container

Trade for:
Powder: H335, HP38/Win231, AutoComp, Trail Boss, CFE Pistol, Universal
Primers: Small Pistol
Bullets: 9mm
Lead​
 
Last edited:
I have 500+ 45acp brass, decapped and clean. Range pick up's. They all look real nice. Ready to powder and shoot. Both small and large primer. Will not sort.

I'm looking to trade piece for piece for some .223 brass, clean and useable. If you have ratty looking junk I still trade at 3 to 1.

Will not drive over 10mi, if that, as this is not that important to me.

If your near Townsend and are interested let me know.
 
1lb of RL7 as I goofed when purchased on 19 SEP for 1lb of RL17, Varget or H4350.

I am located in Southern Worcester County. I can meet Worcester, Danielson CT, Sturbridge, Mendon.


PM if you can help me out with a trade.


ALL LAWS WILL BE FOLLOWED
 
I have quite a bit of lead and molds to make different bullets. I'm looking for brass. Mostly 9mm, 38 special, and 45. I'd trade either lead ingots or cast bullets for your brass.

For molds I have
.358 in 95, 105, 125, 130, 158 gr
-can be sized to .357 or .358.
.401 in 180gr
.452 in 205gr and 225gr
.458 in 350gr
.476 in 400gr
.501 in 440gr

I could hitek coat them also.
 
Last edited:
I have quite a bit of lead and molds to make different bullets. I'm looking for brass. Mostly 9mm, 38 special, and 45. I'd trade either lead ingots or cast bullets for your brass.

For molds I have
.358 in 95, 105, 125, 130, 158 gr
-can be sized to .357 or .358.
.401 in 180gr
.452 in 205 and 225gr
.476 in 400gr
.501 in 440gr
Check with 55_grain for brass. He did have a good deal of 38 at one point.
 
I have lots of brass. I have the most in 9mm, .38spl, .40 S&W and .45acp. I probably have brass in about a dozen other calibers. What else are you looking for?
 
GONE!

I have had 61 pieces of once fired .30-30 brass. I haven't prepped it at all (I think, I picked it up a long time ago)

I don't want anything in return, except maybe a story about how great your .30-30 rifle is.

Pick up in Billerica, North Nashua, Mass Rifle, or Woburn Sportsmen's.

 
Last edited:
Found a couple large coffee cans of .40 S&W brass I don't want

Looking for
308 lapua brass
45/70 brass
30/30 brass
lyman/ideal tong tools
bullet molds
 
Looking for .35 remington brass or .375 win.or bullets. I have 3006 ,7mmrem mag,and maybe some others.Also have a #35 rcbs shell holder.7
 
Last edited:
I was reorganizing my reloading components and uncovered 5 boxes of penn bullets. These are lubed lead bullets. I am not going to use these bullets but don't want to melt them down since they are perfectly fine. I'd be interested in trading for almost anything else for reloading and casting; lead, brass, primers, powder, etc.

Here is what I have:
380/100 tc
9/120 tc
38/158 swc
40/165 tc
45/200 swc

If you're interested in any of this I can weigh them up and we can figure out a valuation.
 
Looking for some 32 S&W brass.

I can trade 32 long or 327 federal brass for it.
Or lots of other cast bullets and or brass.
 
I have about 80pcs of hornady 77gr .223 and 200ish Berrys 125gr .357 .

Couple .45 , .40 and 9mm ammo boxes.


Dont need this stuff and about the only thing i can use are some 50 or 100rd boxes for .223 .
 

Attachments

  • 20181014_153600.jpg
    20181014_153600.jpg
    127.9 KB · Views: 20
1x10 LB of Bullseye (same lot)
1x5 LB of Unique (same lot)

Would trade 10 lbs for an 8 LB of Varget. Also always looking for CC1 450/41 primers.
 
73 pcs of 75gr Hornady ELD
85 pcs of 55gr Hornady

200 ish .358 berrys.

Free if you can meet near 24 from Brockton to Fall Riv.
 
Last edited:
Back
Top Bottom