Sig P320 Trigger suggestions

Rating - 0%
0   0   0
Joined
Feb 22, 2018
Messages
12
Likes
0
Hey everyone I am looking for suggestions for straight trigger replacements for a Sig P320. Also what to replace/upgrade to make the trigger pull easier. It’s my first gun so any help is going to be awesome. Thanks in advance everyone.
 

Masswhole

NES Member
Rating - 100%
7   0   0
Joined
Feb 17, 2017
Messages
591
Likes
1,116
Location
north shore
Does that also reduce the trigger pull weight?
Not sure offhand.
I don't own a 320 but have shot many free-state versions and don't find the trigger pull excessive.
The MA versions are probably the same weight, just with the addition of the safety.
My experience with flat triggers (DA/SA sigs and my ar) is that they reduce perceived weight simply due to leverage changes, but GG may also alter the geometry in other ways, I'm sure their site or a call would answer that.
 
Rating - 100%
4   0   0
Joined
Mar 2, 2009
Messages
33
Likes
11
I put an Apex Flat Advanced Trigger in my full-size P320. In combination with polishing the contact points between the trigger bar and the FCU, it reduced the weight by nearly 2lbs - from 7lbs 7oz to 5lbs 8oz.

Note that this was before Sig began their P320 "factory upgrade" program in response to the drop test issue. Apex subsequently recalled all their flat triggers, re-releasing them with a different SKU as compatible "only" with post-upgrade P320s. I have no idea if they actually changed the trigger design or if they're just attempting to protect themselves legally.
 
Top Bottom