• If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

Show us your Snipers and Hunting Rifles

Joined
Jun 5, 2008
Messages
677
Likes
20
Location
Farm Land of Illinois
Feedback: 31 / 0 / 0
Show us your snipers and hunting rifles. Here is my Winchester 7mm rem mag hunting rifle.

2.jpg


3.jpg


4.jpg


7.jpg
 
I have a PTR-91 I use as my distance gun. Just added the new Williams trigger pack w/Contour trigger & Magpul PRS.

SNC00128.jpg
 
Last edited:
Savage Model 10 heavy barrel in .308

100_1044.jpg


Russian Saiga .308

NewSaiga1.jpg


Romanian Romak 3

RomanianDragunov.jpg


Romanian AES10B.

happyaes2.jpg


Not really a sniper rifle but I can at least see where I'm hitting at 100 yards now.
 
Those are some seriously nice rifles! I can't even post mine as I don't want to ugly up the thread now. What is that PT-91 chambered in? Looks vicious!
 
30-06 Remington 740 shoots 2"-3" 5 shot groups @100y with open sights. Not bad for a gun labeled as a POS by most.
SANY0663.jpg

And my Mossberg 817 to snipe out the little critters.
SANY0655.jpg

BTW: In case you notice, tinfoil on the table legs is so my cats don't dig at it, ugly but it works.
 
Last edited:
my favorite. [smile]

DSCN0621.jpg


Savage 10FP, .223 w / Bell & Carlson Stock, Harris 6 to 9 Bi Pod, Weaver 1 piece base mount, Warne low-mount rings and the Super Sniper 20 x 42 scope.

the stock has a the maxxguard finish, gives it a non-slip / soft feel as well.

things shoots good...
 
Long range rifle,not a sniper.[smile]

Badger M2008 action in .308
Accuracy Intl. 2.0 stock
Mike Rock 22" 5R 1 in 11
Schmidt and Bender PM2 5-25x56 P4F
Badger rings
Jewell trigger @1lb
Put together by Patriot
Harris bipod shown,but switched to an Atlas

2009_01030008.jpg


Um.........wow! We have a winner.[wink]

Here's my Remington LTR with a Bushnell Elite 4200 6-24 x 50:

ltr.jpg
 
Long range rifle,not a sniper.[smile]

Badger M2008 action in .308
Accuracy Intl. 2.0 stock
Mike Rock 22" 5R 1 in 11
Schmidt and Bender PM2 5-25x56 P4F
Badger rings
Jewell trigger @1lb
Put together by Patriot
Harris bipod shown,but switched to an Atlas

2009_01030008.jpg


Greg, That is bad ass!
 
Those are some seriously nice rifles! I can't even post mine as I don't want to ugly up the thread now. What is that PT-91 chambered in? Looks vicious!

Chambered in .308. It is accurate enough for what I need and I like that I can pull the scope & bipod off quickly (scope on quickrelease mounts) and I have a proven MBR.
 
This is my long range rifle, an ICFRA Target Rifle made from a trued and sleeved Remington action, Krieger 30" Palma contour barrel with a .308 Winchester '95 Palma chamber throated for Sierra 155 Match Kings. Rear sight is a PNW with a Gehmann adjustable aperture. Front sight is a Stallings Machine 30 mm Rightsight with a 1.5X magnifier and a Gehmann adjustable aperture. No bipods allowed in this kind of long distance shooting, only prone with a shooting coat and sling for support.

Last long range match I went to went like this:
800 yds: 139-2X
900 yds: 142-3X
1000 yds: 142-3X
Each distance has a max 150 points.

DSC00400.jpg

DSC00401.jpg

DSC00408.jpg


Hunting rifle is a CZ 550 FS in 6.5X55

pic000.jpg

pic003.jpg
 
Long range rifle,not a sniper.[smile]

Badger M2008 action in .308
Accuracy Intl. 2.0 stock
Mike Rock 22" 5R 1 in 11
Schmidt and Bender PM2 5-25x56 P4F
Badger rings
Jewell trigger @1lb
Put together by Patriot
Harris bipod shown,but switched to an Atlas

2009_01030008.jpg

I want one.
 
New 700 Remmy Build

Build is starting to come together, after about a 5 month wait the stock came in last night. The rifle started out as a 700 SPS 20" and I had the barrel threaded to accept the VAIS brake. The base is a Badger 20 degree and now comes shopping for a scope.


I am really leaning towards a Nightforce and have to narrow down my choices to the NXS 3.5 x 15 x 56 with the NP-R1 or R2 or the 3.5 x 15 x 50 with the Mil Dot or MLR reticle.

Rings I am thinking of the Nightforce or Badger still deciding.
Other modifications I plan for this rifle will be:

GA Precision
Badger Ordnance Tactical Bolt Knob - installed
Install G.A. Precision Bolt stop/release Mod on Remington 700
gun-1.jpg


gun2.jpg


gun1-1.jpg
 
Build is starting to come together, after about a 5 month wait the stock came in last night. The rifle started out as a 700 SPS 20" and I had the barrel threaded to accept the VAIS brake. The base is a Badger 20 degree and now comes shopping for a scope.


I am really leaning towards a Nightforce and have to narrow down my choices to the NXS 3.5 x 15 x 56 with the NP-R1 or R2 or the 3.5 x 15 x 50 with the Mil Dot or MLR reticle.

Rings I am thinking of the Nightforce or Badger still deciding.
Other modifications I plan for this rifle will be:

GA Precision
Badger Ordnance Tactical Bolt Knob - installed
Install G.A. Precision Bolt stop/release Mod on Remington 700
gun-1.jpg


gun2.jpg


gun1-1.jpg

I AM DIGGING IT! [smile]
 
DSCN0630.jpg


cross-post / minor update.

Remington 700 SPS Tactical in .308

base mount? i'm not sure
rings? appear to be Burris
scope? - do a search [laugh]

thing shoots good
 
My new long range project.
Savage 12FVSS .308, Dednutz base/rings, cheapo 6x24 42mm scope till I figure out it's replacement.
sav12bvss.jpg

sav12fvss1.jpg


*7/12* Range report
So far so good
308425gr1.jpg
 
Last edited:
wiskie762: get the bell & carlson [wink]

overall, if your hunting (which i don't do), the choate is heavy....

if your shooting off the bench, the B&C better IMO.

nice gun too!
 
Back
Top Bottom