Reloading Component Trading Thread - Please Read the Rules In the OP Before Posting

Status
Not open for further replies.
I Have:

.308 Brass.
.45 200 grain hollow point hard cast lead bullets.

I Would Like:
.45-70 Brass
.45 Auto Rim Brass
.45 ACP Brass
.223/5.56 Brass

Statement of Legal compliance:
When ammunition, magazines or other regulated items are sold/bought or traded as part of this transaction, I agree to follow all applicable local, state and federal laws and regulations pertaining to these items.
 
Last edited:
I have 2000 55gr Hornady fmj bt projectiles
Will trade in weight for 69 gr, Sierra Match king

Thanks, Mike
 
Last edited:
I have:

Powder:
H322
H335
Varget

Brass:
lots of 40 S&W,
7mm Rem Mag (some new),
308 Win (Lapua, Fed Match)

Bullets:
Hornady 162 gr 7mm Amax Blems

I need:
Quality .224 projectiles around 50-55 grains
Lapua or Hornady match 30-06 and .223 brass

Please PM me

Dave
 
Last edited:
I have a bajillion (yeah, I said Bajillion) once fired .223/5.56 military brass. Willing to trade for most any powder, primers, lead, bullets, etc.
 
I have the following brass to trade (mostly tumbled range brass):

.22 Hornet 13
.222 Remington 12
.243 Winchester 4
.25 ACP 7
.270 Winchester SHORT MAG 6
.280 Remington 19
.30-30 Remington 24
.300 Winchester Magnum 1
.308 Win 71
.32 ACP 17
.338 Winchester Mag 4
.357 Mag ~145
.357 H&H Magnum 1
.357 Sig few
.38 Special ~20
.38 Super 18
.40 S&W 0
.45 Auto 0
.450 Bushmaster 66
.50 BMG 1
6.5 X 50 Jap 3
6.5 Remington Special 17
6.5x52mm Mannlicher-Carcano 11
6mm Remington (.244 Rem) 21
6.8 Rem SPC 135
7mm Mauser 7
7mm Remington Magnum 11
7.62X25mm Tokarev 1
7.62X39 2 lb
7.92X33 Kurz 1

I am looking for:

jacketed bullets for .30-06
Jacketed bullets for 9mm Luger
75 - 85 grain jacketed bullets for .223
large rifle primers
small rifle primers
small pistol primers
 
Last edited:
I have the following to trade:
Rem mag 7mm 32 pc 12 are nickel
Remington .22 "jet" mag. 80 pc.


I need:
.308 once fired
556/.223 once fired




Sent from my iPhone using Tapatalk
 
Last edited:
Brass brass brass!

Updated 11/5/12


All brass is range brass, untumbled, not de-primed, not resized. All are once-fired factory to the best of my knowledge. Reloaders aren't prone to leaving good stuff behind! Will ftf or ship.

Rifle brass

.204 Ruger +19
.223 +1000 or more, all same headstamp.
.243 WIN +20 (in box)
6.8 SPC +2
.270 +5
.270 WSM +2 (nickel)
.257 WBY MAG +10
7mm REM MAG +18
7mm Remington Ultra Magnum +20. These are huge!
.264 WIN MAG +2
.30 carbine +60 or so
.30-30 +18
.30-06 +75
.300 WBY MAG (not WIN MAG) +9
.338 WIN MAG +2

Pistol brass
.357 SIG +24
.38 SUPER +3
.38 SPECIAL +350 or more
9mm +1000 or more
.40 S&W +200
.45 +500

Looking for:
.44 Mag

Always need more:
Rifle Projectiles: .224,.308,.311,.323
Pistol Projectiles: .380, .38/357, 9mm,.40, .44,.45, lead, plated or FMJ.
Primers or powder (ftf only)
Ammo!

55_grain
 
Last edited:
FTF in the metrowest MA area only

I have
1000 CCI Large pistol primers


I need
Small pistol primers


Updated 2/10
 
Last edited:
I HAVE FOR TRADE:
NONE HAVE BEEN DEPRIMED or re sized.

9MM- 18 lbs Tumbled range brass
40S&W- 15 Lbs mixed Range and Once fired
38SP- 131 RDS Nickel Plate range brass tumbled
38SP- 519 RDS Brass case range brass tumbled


I NEED BRASS FOR:
.45 colt
.45-70
.204 Ruger
.223

Need these dies and reloading tools as well if want to trade for brass.
.223 collet dies
45-70 Molds
 
Last edited:
I have from several to several dozen of the following: 7mm mauser,.35 remington,.22/250,.270 winchester,5.7x28,.264 winchester, 6.5x50,.450 marlin and a large bucket of .40 s&w. I'll trade for brass in just about any other calibers.
 
Have: 30 Carbine (500 or so)

Need: Hornady/ Winchester 55G FMJ .224"

PM to discuss numbers.
 
Last edited:
Once Fired Brass
30 brit 303 Berdan primed brass RL surplus
30 Brit 303 Berdan primed brass South African surplus





Shoot me a offer on anything listed worst i can say is NO


Need
Brit 303 commercial once fired brass
8mm Mauser boxer primed once fired brass
6.5 Carcano commercial
7.62x54R Boxer Brass

Updated 3/19/2012

Figured i post a updated not so cluttered post
 
Last edited:
Updated 11/21/12

I have:

Projectiles

I will need to count for an accurate total but below are estimates
-- 9mm (Mix of Berry's and Remington) 115 gr - Est. 1900+ count
-- 9mm LRN 115 gr - Est.: 500 count
-- 40 S&W SWC Lead 155 gr - Est.: 500 count

I need:

Brass:

- 223 Remington
- 38 Special
- 38 S&W
- 44 Magnum
- 45 ACP
- 45 Long Colt

Powder (Must Be Factory Sealed)

- W231
- HP38
- W748
- Unique
- Titegroup

Primers
- CCI Large Pistol
- CCI Small Pistol
- Winchester Small Rifle
 
Last edited:
Updated 8/24

I have:

a few thousand 223 brass, most will be once fired but may be some small amount of range pickups that are unknown. I just started tumbling this in small batches to check it out so if you want it clean I may be able to accomodate that.



I want:

44 Rem Mag brass,
7.7 Jap brass,



Name your trade amount for what you have. I am looking for a bunch of 44 brass and likewise with the 7.7. If you have any amount and are willing to trade for 223, let me know. Name the amount of 223, I am open to anything at this point.
 
Last edited:
I have :

11 pieces .45Colt; tumbled
170 pieces .40 S&W tumbled

Looking for .223, .45, .380auto, 9x18 Makarov brass, small rifle or pistol primers, large pistol primers, .223 bullets, 52, 55 or 62 grain, style not too important.

I have 1000 shotshell primers (900 Winchester; 100 CCI). I would like to trade these for same number of primers in small/large pistol or small rifle, CCI preferable but would consider Remington or Winchester primers. Because Primers are expensive to ship (hazmat), it would have to be a FTF trade. Would also consider trading these primers for 52 to 62 gr .223 bullets.
 
Last edited:
I have up for trade

1 new unopened box of Sierra Matchking bullets 223 caliber 80 grain BTHP 500 heads and 102 loose heads, so that is a total of 602 Sierra Matchking bullets 223 caliber 80 grain BTHP heads.

I am looking to trade for 1 box of Sierra Matchking bullets 223 caliber 77 grain BTHP 500 heads.
I will pay shipping to you and you pay shipping to me

http://www.midwayusa.com/product/14...-224-diameter-80-grain-hollow-point-boat-tail

Mark
 
Last edited:
I have 5.56 mm military brass. Lots of it. Willing to swap some for .40 s&w dies. Dillon preferred, but open to whatever.
 
brass

Brass for trade . ., .270 nickle =53, 7.62x39 =19,10mm =6,30-06 brass =21 , .357 sig =42 , .38 super nickle =50 , ., .30 cal brass = 75 ,
Looking for .223/5.56 and .44 mag
 
Last edited:
Have:

Remington 6 1/2 Small Rifle Primers (270 count)
Tula Steel cased .223 (91rds)

Could use:
.223 or .40 brass
 
Last edited:
updated 11/12

Have:
9mm cases, range pick ups, assume 1x fired, qty ~1.5k
.270 win- qty 18 1x fired, tumbled
.308 win- qty 18 assume 1x fired

161 gr SWC cast bullets @ .358 with red carnuba lube
195 gr SWC-ish cast bullets @ .452 with red carnuba lube
405 gr FN cast bullets @ .458 with red carnuba lube, gc design w/o gc

cast from clip-on wheel weights, approx 12 BHN (didn't test, just an educated guess)

IMAG0841.jpg


Want 1x fired, unprocessed (tumbled ok) brass:
.30-30
.45-70
.45 ACP

also want:
.30 gas checks
.45 gas checks
lead
 
Last edited:
I have the following as of 9/30/12:

327+ cases of 45 ACP (weighed 4 lbs) Range Brass not tumbled but looks good, mixed headstamps and a small precentage nickle..did not count, weighed a shell and estimated but am being conservative.

1,800+ cases of 9MM (weighed over 16 lbs) 1X fired by me, not tumbled, mixed headstamps but mostly Remington UMC..did not count, weighed a shell and estimated but am being conservative.

220 cases of 380 ACP 1X fired by me, not tumbled, mixed headstamps...counted but stopped at 220 and threw the remaining handful in the bag.

120+ cases of 40 S&W WWB Range Brass not tumbled. I believe these are only 1X fired as I watched the guy shoot and leave it scattered all over the place and the factory boxes were newly opened...counted but stopped at 120 and threw the remaining handful in the bag.

29 cases of 30-06 Win. Sprg. - was at the range talking to a guy and watched him fire these and he asked me if I wanted the brass.

14 cases of 30-30 Win. - was at the range talking to a guy and watched him fire these and he asked me if I wanted the brass.

Need:

38/357 bullets, prefer 125 gr or 158 gr JHP

38/357 brass in like kind condition of traded

223 Remington brass in like kind condition of traded

223 Remington bullets, 55gr only.

CCI 550 small pistol magnum primers (not on stripper clips)

Bullseye, 2400 or Varget powders (please not opened)

Othere stuff I am interested in...38/357 carbide die set...digital scale....digital calibers...plastice ammo boxes....single stage press in working order. Located in North Central MA, so Fitchburg/Leominster area, route 2/495 interchange, IDC in Clinton, Blue Northern in Ayer, IDC in Hudson, or Harvard Sportmen's Club are good places for me to meet. Please PM here. Thanks
 
40 bullets in box .310 123gr Speer FMJ cash price 8 dollars


Number 2 Lee Press shellholder cash price 4 dollars


Once Fired Brass
All Below Boxer Primed


40 S&W = 228 pieces cash price $5.00


380 = 90 pieces cash price $4.00


30 carbine = 40 pieces cash price $5.00


7.62x25 Tok S&B brass = 21 pieces cash price $2.00


30.06 brass = 36 pieces cash price $5.00


7.62x54R PPV brass = 6 pieces


7mm Rem Mag =3 pieces


45 acp small primer pocket = 8 pieces


45 acp large primer primed and clean = 6 pieces


30/30 = 4 pieces


308 Lake City = 1 piece


270 Win = 1 piece


44-40 = 1 piece




Looking for

45acp Large Primer Pocket only Brass

38 special wadcutter bullets .357 prefer 158gr

You are responsible for shipping cost to you. Unless trading
 
Last edited:
I have 700 to 1000 cases of .357 Sig, looks like once fired ( I will count tomorrow to verify) I am looking for 9mm Luger brass, cci small pistol primers, unique powder, or 115 gr. bullets.

Edit: all matching headstamps, all Speer.

UPDATE: counted today, 876
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom