1. If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

WTS ****Price reduced**** Mackie SR32-4 VLZ-Pro 32 channel mixer for sale

Discussion in 'NES Yard Sale' started by timbo, Aug 18, 2017.

  1. timbo

    timbo Navy Veteran NES Member

    Joined:
    Dec 17, 2010
    Messages:
    7,769
    Likes Received:
    1,988
    Location:
    Rt 3, NH
    P8150074.jpg


    I'm selling my Mackie SR32-4 VLZ Pro with road case. This mixer is in excellent condition. I just don't use it any longer. Each channel works (no dead channels) and each fader is quiet (no scratchies).

    There is a bit of paint missing where tape was laid in front of the faders to mark each channel. Other than that, the mixer looks almost new.

    Please let me know if you need any further information and thanks for checking out my listing.

    Please, no trades. Cash only. $300.00


    These are the specifications lifted from Mackie:

    Mackie designed the SR24-4 and SR32-4 to be the best value 4-bus live sound mixers ever offered; yet they also knew that almost anyone who performs music live wants to record it, too. So they made sure that the SR Series mixers could do both well. Both mixers feature major amounts of headroom, thanks to Mackie's VLZ circuitry. They also have main and submix amplifiers that use our distinctive negative gain mix architecture, which provides double the mix headroom of conventional designs.

    Ultra-quiet high-headroom mic preamps on mono channels (20 on the SR24-4, 28 on the SR32-4) mean great-sounding vocals or instruments. And their low cut filter (on mono channels) centered at 75Hz allows you to cut out mic thumps and wind noise that can enter your mix and rob you of amplifier power. 4 buses make live mixing a breeze - send all of your vocal mics to one bus, maybe your drum tracks to another - by letting you control the overall level of those channels with one fader.

    The SR Series mixers have 6 aux sends per channel, with the flexibility to handle multiple chores at once. 2 of the aux sends are pre-fader, so you can use them for monitor sends during a live session. Two other aux sends are post-fader, which you would want for effects during studio tracking and mixdown. But get this: the final 2 aux sends are switchable to pre- or post-fader! So you can have 4 pre-fader aux sends, or 4 post-fader aux sends, whenever you need them.

    Equalization on the SR Series mixers is quite musical. Besides the fact that our Hi and Lo shelving EQ are centered at useful frequencies - 12kHz and 80Hz, respectively - the SR24-4 and SR32-4 have sweepable midrange EQ (on mono channels). You can center the midrange anywhere from 100Hz to 8kHz, low enough to use as a second low frequency EQ, and high enough to use in the high frequency range. (Stereo channels on both mixers have 4-band EQ, with 12kHz and 80Hz Hi and Lo shelving EQ, and 2 fixed mids at 3kHz and 800Hz.)

    Along with great channel EQ, the SR mixers come with factory "Air." This peaking EQ circuit, centered at 16kHz, enhances guitars, vocals, percussion, whatever, giving a gentle "lift" to the extreme high end. The result is extra detail and fidelity in the high end. Sound On Sound magazine said about Air: "[The] Air controls turned out to be far more effective in adding top-end clarity than you might first imagine - it's almost an "exciter" kind of effect, but without the harshness."

    When you put all of the SR Series' features together, you'll find 2 highly-affordable sound reinforcement mixers that have what it takes to serve as flexible live and studio consoles. High-headroom/low-noise mic preamps (20 on the SR24-4, 28 on the SR32-4)

    Features
    4 buses

    6 aux sends

    3-band EQ with sweepable mids (4-band fixed EQ on stereo channels)

    Low cut filter on all mono channels

    "Air" EQ circuit

    Talkback section with level control, LED, and separate rear XLR input

    "Double-bused" sub outs for 8-track recording without repatching

    Inserts on all mono channels and subs

    AFL/PFL solo on all channels (globally switchable)

    60mm log-taper faders for consistent fades

    Balanced XLR and 1/4 in. main outputs

    Additional mono XLR main out with level control

    Balanced inputs and outputs (except phones, inserts, RCAs)

    Built-in power supply
     
    Last edited: Dec 16, 2018

  2. timbo

    timbo Navy Veteran NES Member

    Joined:
    Dec 17, 2010
    Messages:
    7,769
    Likes Received:
    1,988
    Location:
    Rt 3, NH
  3. timbo

    timbo Navy Veteran NES Member

    Joined:
    Dec 17, 2010
    Messages:
    7,769
    Likes Received:
    1,988
    Location:
    Rt 3, NH
  4. timbo

    timbo Navy Veteran NES Member

    Joined:
    Dec 17, 2010
    Messages:
    7,769
    Likes Received:
    1,988
    Location:
    Rt 3, NH
  5. timbo

    timbo Navy Veteran NES Member

    Joined:
    Dec 17, 2010
    Messages:
    7,769
    Likes Received:
    1,988
    Location:
    Rt 3, NH
    Bumpster
     

Share This Page