need a glock front sight tool

[headednorth]

Anyone in the North Shore area have a Glock front sight tool I could use? Just need to remove a front sight so I can return the slide. Should only take a few seconds.

eta- Im in Danvers, work in Chelsea.

 

[millcity]

https://youtu.be/VrmE51y8uQU

If you cant get your hands on one and you have a dremel try that . That's what I did to remove the front sight on my G17.

 

[92G]

it's a 3/16" hex tool.
can buy one at any decent hardware store. i got mine at ace hardware and filled it in with cotton to make it more shallow (to hold the screw in place better when inserting).

 

[headednorth]

Its for a goofy Lonewolf g17 long slide. Theres a small hole in the angled part to the bottom of the slide that it has to pass through. Its not exposed like in a regular Glock.

Anyway, a member was cool enough to offer to meet me after work tomorrow so Im all set.

 

[92G]

Its for a goofy Lonewolf g17 long slide. Theres a small hole in the angled part to the bottom of the slide that it has to pass through. Its not exposed like in a regular Glock.

Anyway, a member was cool enough to offer to meet me after work tomorrow so Im all set.

how is that any different from glock long slides?
http://glock.pro/glock-tech-warranty/9156-gen3-g34-project-part-2-a.html

 

[headednorth]

how is that any different from glock long slides?
http://glock.pro/glock-tech-warranty/9156-gen3-g34-project-part-2-a.html

Yeah, youre right. Not much different at all.

 

[Mark from MA]

I used a cheap socket from a screwdriver set. The socket wall still hit the front of the slide so I ground it down to make the walls thinner on the bench grinder. Works great and I've used it for many night sight installs

 

[headednorth]

Met up with a fellow NES'r tonight. Took a few seconds. Thanks for the replies.