Patriot
NES Member
I've been putting together a casting station to do my casting indoors and
completed it today. I tested it with a great big Montecristo Churchill to
check it out for venting performance. It works fabulous!
I've got about $30 dollars into it. $20 for the various pieces of venting duct
purchased at the Depot and another $10 for a connector for the fan I used.
All other pieces I scrounged from various places.
The shroud is a Compaq computer case that was discarded at my dump and I
had all the various hardware to put it together. I used to work at a Computer
Typesetting company and a friend had some industrial fans that he had left
over that push around 130 CFM so I got one of those. A drill and my metal
cutting blade on my portable sabre saw did the cutting. Works great (at least
with the cigar).
(The ashes to the left of the Lyman Mag20 are from my cigar...)
Venting Shroud
completed it today. I tested it with a great big Montecristo Churchill to
check it out for venting performance. It works fabulous!
I've got about $30 dollars into it. $20 for the various pieces of venting duct
purchased at the Depot and another $10 for a connector for the fan I used.
All other pieces I scrounged from various places.
The shroud is a Compaq computer case that was discarded at my dump and I
had all the various hardware to put it together. I used to work at a Computer
Typesetting company and a friend had some industrial fans that he had left
over that push around 130 CFM so I got one of those. A drill and my metal
cutting blade on my portable sabre saw did the cutting. Works great (at least
with the cigar).
(The ashes to the left of the Lyman Mag20 are from my cigar...)
Venting Shroud
Last edited: