Issue's feeding .45 on my reloads

I like how you think TY43215 - safety should be first and with that in mind I will start the loads at 4.9
Trust me nothing is more of a concern for me then making sure what I do will be safe for me and the gun and anyone else around.

I will take recommendation of using the online reference for the manufacturers provided as they are sure to be more updated then a printed manual.
 
Thank you Supermoto - the OAL is my biggest concern as this all relates back to feeding issues. I appreciate the input.
 
Ok I got pics but did not have time to offload to upload here.
I checked the OAL of what I had and it was 1.230
I adjusted the dies to now be OAL of 1.255, crimp to .4685 and powder charge to 4.9
I will spend some time today if I can redoing 20 of them and see if I can get to the range to test the results.
 
I found the rounds fired fine through my 1911PD so i may just feed them to it.

The new load I made up feed fine so my problems should be resolved. I expect to load only 20-30 more just to assure that fact as I only had time to check with 5 I did.
 
Back
Top Bottom