installing bottom rail on large frame glock

Joined
Aug 3, 2013
Messages
1,242
Likes
1,361
Location
Mars
Feedback: 0 / 0 / 0
have a glock 20 10mm 2.5 that did not come with a rail below and do on want to buy a frame with one on for $300. they only make glock rail adapters for the small frame guns. have any of you installed one if so what did you use. there are plenty of different size ar15 rails out there that could be tapped and screwed on.
 
It takes gen 1,2,&3 guts and slide. Has an actual rail, if that’s what you want, and a more 1911 grip angle. Takes about 30 minutes to complete. You bite off the 4 raised areas with a pair of end nippers, and open the recoil spring channel with a dremel. Then file, or sand smooth. You can order the frame from lone wolf, and have them engrave it before shipping to you. Or midway, brownells, glockstore, firearms unknown, etc.... It’s not a firearm until you complete it.

024D1F10-C144-4F3F-BAF4-4142D82D2DB4.jpeg

I might have done 1 or six of these. Absolutely the easiest “I made this” project ever.
 
Back
Top Bottom