• If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

Hornady lead bullet replacement?

Joined
Oct 8, 2009
Messages
2,397
Likes
1,859
Location
An Ebola Free zone
Feedback: 29 / 0 / 0
Hello, I presently use the Hornady #12458 255 grain Lead FP over 5gr of trail boss in a 45 colt application. The application is a 1858 Remington BP replica with a 45 colt conversion cylinder.

I am looking to replace these bullets with the blue bullets 250gr RNFP (0.451 dia) bullet. Its 250 for $31 instead of $46 for 200, and I won’t get the leading.

Is there any reason anyone can think of that this would not work? Thank you
 
You could go to the cast bullet seminar and for $20 you get breakfast/lunch and all the knowledge and hand on experience to cast your own.

Just saying ;)

2019 NES Cast Bullet Seminar Sign Up Thread
For what you pay for 1000 bullets, you could set up to cast and coat all the bullets you could ever use...
1k bullets: $124
Lead: 36lbs @$1.25/lb, $45
Cast iron pot: $10 thrift store
Hotplate: $10 Walmart
Toaster oven: $20 Walmart
Ladle: $10 Lee
Mold: $20 Lee
Sizing die: $20 Lee
Hitek coating: $11 (coats about 4k bullets)
Total: $136 ( thrift shop for the hot plate and oven to get it to $124)
 
Hello, I presently use the Hornady #12458 255 grain Lead FP over 5gr of trail boss in a 45 colt application. The application is a 1858 Remington BP replica with a 45 colt conversion cylinder.

I am looking to replace these bullets with the blue bullets 250gr RNFP (0.451 dia) bullet. Its 250 for $31 instead of $46 for 200, and I won’t get the leading.

Is there any reason anyone can think of that this would not work? Thank you

Should work just fine, if not better.
 
Back
Top Bottom