HK/PTR/CETME receiver flat bending jig available

[Sir_Macadoo]

Soon as my parts come in, thus is on like donkey kong. My shop is open.

 

[ChevyGuy91]

Soon as my parts come in, thus is on like donkey kong. My shop is open.

 

[Berserker]

Where can you rent or buy the cetme hk91 jig

 

[JRLB]

Where can you rent or buy the cetme hk91 jig

Here are two spots you can get a jig. I've ordered some stuff from the first site. There is also a guy on gunbroker that sells one. I would recommend signing up for www.weaponsguild.com, if you haven't already done so. There is a ton of good info there as well as other jig types you could build.

http://www.robertrtg.com/store/pc/HK-FLAT-BENDING-JIG-2p2939.htm

http://www.hkparts.net/shop/pc/Flat-Bending-Jig-Set-For-All-HK-Style-Flats-5p1666.htm

 

[warwickben]

Here are two spots you can get a jig. I've ordered some stuff from the first site. There is also a guy on gunbroker that sells one. I would recommend signing up for www.weaponsguild.com, if you haven't already done so. There is a ton of good info there as well as other jig types you could build.

http://www.robertrtg.com/store/pc/HK-FLAT-BENDING-JIG-2p2939.htm

http://www.hkparts.net/shop/pc/Flat-Bending-Jig-Set-For-All-HK-Style-Flats-5p1666.htm

Becareful of prexis aka jetism co owner of weapons guild .
He often offers vapor ware items for presale then is extremely late if he ever delivers . I was quoted 4-7 weeks for a psl barrel. Took over a year and threat of lawsuit to get him to make one. It showed up with A lot of tool marks the whole length of the barrel and not to the specs I wanted . After few 100 rds the chamber blew out.
If you point out bad dealings with some of the vendors they lock threads and make you look like the bad guy.
I talk to a few of the vendors also . They had to pick up his pkm barrel orders when Apex had them 2 years ago because he was making them wrong and taking forever . They basically stepped in since it was effecting the site.
If your going to buy from a vendor that's not a known company, make sure you research them.

The site has a lot of prints and info .

 

[JRLB]

Thanks for the heads up. I've only been using the guild for the info. I don't plan on using any of the vendors.

 

[warwickben]

Thanks for the heads up. I've only been using the guild for the info. I don't plan on using any of the vendors.

A few of the vendors do good work. One guy offers 1/4 tubes drilled for ar15 firing pins . That saves a lot of pain trying to drill into a bolt your making from scratch . Just ream a 1/4 hole press in and your good to go .

Trick is reading a bunch of threads to see if the meet deadlines etc .

 

[clarmsllc]

I have a jig (from HKparts.com) for bending every kind of HK or CETME flat: 33, 93, 91, 94, MP5.

Build you rifle before new AWB turns your kits into expensive scrap!

robertrtg.com has all the parts you need to build your own HK-clone or CETME-clone including flats. It's great place to get parts especially if you don't have a kit.
Let's make this happen folks!

Jig is available for rent or sale and is in classifieds: http://www.northeastshooters.com/vb...or-CETME-HK-G3-PTR-94-93-91-33-MP5?highlight=

I tried your link above but it is not working. I'm looking for a Cetme C flat receiver jig to rent. If someone has information and can email me at [email protected] thanks in advance.

 

[Noreaster13]

I tried your link above but it is not working. I'm looking for a Cetme C flat receiver jig to rent. If someone has information and can email me at [email protected] thanks in advance.

What do you expect from a post almost 11 years old

 

[dnepro-mike]

i still have the jig. i'm not going to build any HK-style anymore so if interested i can sell it to whomever is interested. contact me via PM and we can discuss.
i won't ship the thing - it's just to damn heavy, so plan on picking it up in southern NH Nashua area