Changing this thread from input to review.
I was just looking for a 300 black out upper to play with
I shoot a lot of reduced cast loads and found this to be another decent addition.
So now it's review time.
It looks like Davidson Defense and Omega Manufacturing are either one in the same or are close in relationship. They are at minimum from the same town in Utah.
That said I ordered the 300 16" kit on the 22nd and was actually delivered Saturday to my work. So I didn't get it until today. It started of on the wrong foot.
The box was delivered with a hole large enough for me to remove what was left inside. Amazingly only on part was missing the upper receiver. A call to Omega and replacement has been sent. So it appears they need to work on their packing skills
. The barrel flopping around most likely was the cause of the hole. How the barrel did not fall out or get damaged is beyond me. The barrel was basically loose inside the box. Inspection of the parts not lost look good.
Here is the description.. The upper kit cost me 229$ shipped
DAVIDSON DEFENSE 7075 T6 BILLET UPPER RECIEVER (MADE FROM ONE SOLID BLOCK OF MILSPEC GRADE ALUMINUM 10X STRONGER THAN FORGED UPPERS)
PHOSPHATE MATTE BLACK 16" 300 BLACKOUT 1-8 TWIST PISTOL GAS SYSTEM 2X LAPPED MATCH GRADE BARREL
15'' 6061 T6 KEYMOD HANDGUARD. 7075 T6 ALUMINUM BARREL NUT FOR EXTRA STRENGTH & FINISHED IN THE USA
EXTENDED SOG CHARGING HANDLE ( A $39.99 VALUE)
4150 STEEL GAS BLOCK MADE IN THE USA
STAINLESS STEEL PREMIUM USA MADE GAS TUBE
DAVIDSON DEFENSE MIL-SPEC A3 MUZZLE BREAK/FLASHHIDER 5/8X24 ( MADE IN THE USA)
DAVIDSON DEFENSE MILSPEC FORWARD ASSIST & EZ INSTALL PIN FOR FASTER INSTALL (MADE IN THE USA)
DAVIDSON DEFENSE PORT DOOR DUST COVER KIT ( MADE IN THE USA
I also ordered Davidson Defense black nitrate M16 BCG. 70$ shipped
I will add pictures as I go ....it's going to be a in between projects project.
Continued on post #8
I was just looking for a 300 black out upper to play with
I shoot a lot of reduced cast loads and found this to be another decent addition.
So now it's review time.
It looks like Davidson Defense and Omega Manufacturing are either one in the same or are close in relationship. They are at minimum from the same town in Utah.
That said I ordered the 300 16" kit on the 22nd and was actually delivered Saturday to my work. So I didn't get it until today. It started of on the wrong foot.
The box was delivered with a hole large enough for me to remove what was left inside. Amazingly only on part was missing the upper receiver. A call to Omega and replacement has been sent. So it appears they need to work on their packing skills
. The barrel flopping around most likely was the cause of the hole. How the barrel did not fall out or get damaged is beyond me. The barrel was basically loose inside the box. Inspection of the parts not lost look good.
Here is the description.. The upper kit cost me 229$ shipped
DAVIDSON DEFENSE 7075 T6 BILLET UPPER RECIEVER (MADE FROM ONE SOLID BLOCK OF MILSPEC GRADE ALUMINUM 10X STRONGER THAN FORGED UPPERS)
PHOSPHATE MATTE BLACK 16" 300 BLACKOUT 1-8 TWIST PISTOL GAS SYSTEM 2X LAPPED MATCH GRADE BARREL
15'' 6061 T6 KEYMOD HANDGUARD. 7075 T6 ALUMINUM BARREL NUT FOR EXTRA STRENGTH & FINISHED IN THE USA
EXTENDED SOG CHARGING HANDLE ( A $39.99 VALUE)
4150 STEEL GAS BLOCK MADE IN THE USA
STAINLESS STEEL PREMIUM USA MADE GAS TUBE
DAVIDSON DEFENSE MIL-SPEC A3 MUZZLE BREAK/FLASHHIDER 5/8X24 ( MADE IN THE USA)
DAVIDSON DEFENSE MILSPEC FORWARD ASSIST & EZ INSTALL PIN FOR FASTER INSTALL (MADE IN THE USA)
DAVIDSON DEFENSE PORT DOOR DUST COVER KIT ( MADE IN THE USA
I also ordered Davidson Defense black nitrate M16 BCG. 70$ shipped
I will add pictures as I go ....it's going to be a in between projects project.
Continued on post #8
Last edited: