I need to adjust the elevation on my scope, but want to do it properly. Is there a locking screw on the elevation screw or do I just turn it with a screwdriver? The windage screw is locked in place with a second screw, but I do not see that on the elevation knob. I tried to gently turn it, but she wouldn't give so I figured I'ld ask you guys.
-
If you enjoy the forum please consider supporting it by signing up for a NES Membership The benefits pay for the membership many times over.
c more serendipity help
- Thread starter noidlight
- Start date
Noidlight,
There is a locking screw for the elevation. It is located to the left of the windage adjustment. Use a small allen wrench to back it out. (not sure of the size, but the scope should have come with the proper size). Then adjust the elevation with the proper size flat head screwdriver.
Hope this helps.
There is a locking screw for the elevation. It is located to the left of the windage adjustment. Use a small allen wrench to back it out. (not sure of the size, but the scope should have come with the proper size). Then adjust the elevation with the proper size flat head screwdriver.
Hope this helps.
Similar threads
