• If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

abct3 New ammo design

Joined
Jul 19, 2010
Messages
888
Likes
215
Location
Berkshires, MA - in the woods
Feedback: 0 / 0 / 0
I did several searches, but haven't found a match, so I'm hoping this isn't a dupe. What do you guys think of this stuff? My only concern would be that might ensure hits but limit penetration.

From "The Shooting Wire" :
New Bullet For Existing Handguns And Hand-Held Firearms

Denver, CO - Recognizing that more than 90 percent of shots fired by handguns and hand-held firearms miss their targets, Advanced Ballistics Concepts, LLC (ABC), a ballistics research and development company, today announced the company has invented the first multi-part bullet that immediately unlocks and expands to a predetermined diameter and pattern of spread upon leaving the tip of a rifled barrel. This new wide envelopment bullet - enhanced with ABC's patent-pending Triple Threat™ Technology (T3™) - significantly improves a shooter's hit probability in ultra-close and mid-range engagements because the bullet produces a "spider web"-like effect prior to impact.

T3 bullets are similar to multi-pellet buckshot in that both deliver multiple strike points. However, a T3 round enhances performance because the bullet expands up to 4x faster than buckshot. The bullet design also allows each segment to have a greater mass which in turn produces greater stopping power.

T3 is the first bullet to interconnect three separate segments with Kevlar strings that expand like a spider web to a predetermined diameter and spread pattern that not only dramatically improves the accuracy and hit probability, but does so without disrupting the normal flight path of a spinning bullet. T3 bullets employ a proprietary "accelerated radial spread"™ that compensates for most, if not all, of typical shooter error.

"According to national law enforcement statistics, more than 90% of shots fired in life and death situations miss their mark," said Todd Kuchman, Co-Founder and President of ABC. "Our research shows that these missed shots are the result of 'last second twitch' which occurs to some extent whenever a gun is fired, particularly in highly stressful situations. Because every T3 bullet offers a wide shot profile, it compensates for marksman's error which significantly increases hit probability."

While improved hit probability is the primary benefit of T3™rounds, safety also played a large role in the design of the technology. "No one wants to cause collateral damage when discharging a firearm, particularly in the confusion of a threatening situation," continued Kuchman. "That's why the T3 bullet is the first to offer SMART-STOP™ technology, a proprietary braking system that can be configured to stop the bullet after hitting a typical household wall or live target."

ABC is preparing to offer its T3 bullets in three distinct categories: non-lethal (aka: T3 Stinger™), semi-lethal (aka: T3 Stunner™) and fully-lethal (aka: T3 Stopper™) variants. Each variant is optimized for use by the company's primary target markets: military, police, hunters and personal gun owners. By offering the three variants, ABC supports the blended use of T3 bullets (Smart-Stack™) which eliminates the need for additional expensive weapons -- such as shotguns -- and Tasers that military and police typically have to carry to address varied threats. In addition, all T3™ bullets are "backward compatible" to eliminate the need to purchase new firearms.

The company is currently focused on securing partnerships with manufacturers/distributors capable of bringing this innovative ballistic technology to the multi-billion worldwide ammunition/personal defense markets. Organizations interested in working with ABC can contact the company at (970) 396-4136 or visit the company's website at www.abct3.com
 
Lets say that they adopt popular calibers like the .45 230gr. The core would be about 100gr right? so that leaves 3 projectiles about 43gr each. With that said I don't think the projectiles themselves have enough mass to penetrate. Unless its designed so that the kevlar wires cut through flesh? Or am I missing the bigger picture...?
 
Lets say that they adopt popular calibers like the .45 230gr. The core would be about 100gr right? so that leaves 3 projectiles about 43gr each. With that said I don't think the projectiles themselves have enough mass to penetrate. Unless its designed so that the kevlar wires cut through flesh? Or am I missing the bigger picture...?

Yeah. That's kind of my train of thought on this, too. The core looks like it may be polymer and designed to fall away. Still, the 3 projectiles would be around 65gr max. If the kevlar is designed to stay intact and penetrate on impact, I would think there won't be much penetration. If they break away, maybe the effect would be a bit better, but still would take energy away from the projectiles.

Edit: These might have trouble actually stopping a threat, but I bet they leave very interesting scars.
I would like to see results on ballistic gel.
 
Last edited:
I'll just stick with double-stack magazines and shoot more.

If 90% miss....10% hit.

I carry, on average, 46 rounds. 4.6 hits ain't bad.
 
I sure hope it's more like 90% hit and 10% miss. But then I carry a S&W 442. 90% misses would only be half a hit.

I was just using their statistics, which are more than likely fluffed up to sell their crap. I'd be happy with 90% hits....41.4 holes in a dude will surely mess his day up.
 
My dad had a "Laced buckshot" 12 ga round ( that vanished....) that was for "brush clearing"

Nothing new under the sun

I was just about to post it almost sounds like a new take on using split shot and thin wire leader on a 12ga round. Just going to be something else for the liberals to scream about.

Dave
 
Back
Top Bottom