• If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

80% 9mm lower

Kevin_NH

NES Member
Rating - 100%
9   0   0
Joined
Jun 25, 2010
Messages
8,998
Likes
2,901
Location
WNW of MHT
Appears the extractor ejector is steel, and for whatever reason couldn't be cast into place in the polymer, so needs to be added after machining out the pockets?

See this (metal) 80% lower for an example of how it'd normally be attached with screws:
 
Last edited:

allen-1

NES Member
Rating - 100%
6   0   0
Joined
Feb 23, 2014
Messages
10,268
Likes
21,408
Location
GA; (CT escapee)
INSTALLATION OF THE EXTRACTOR:
  1. Use heavy duty epoxy and set extractor in place
  2. Align the extractor in place and draw line on extractor. Apply epoxy, install the extractor. Allow curing time.
 
Top Bottom