38ExtraSpecial
NES Member
It's time for hot lead again.
Cost $20 Via PayPal friends and family. [email protected]
Please put your full name and your NES handle in the notes.
This $20 gets you damn close to 100 years of bullet casting experience, breakfast, lunch and all the bullets you can cast while you're at the event.
If you have a firearm that you want to bring to slug the bore to see what size bullet you need to use please bring it with you.
If you have an odd cartridge or you're set on making a specific bullet please ask ahead of time and we can try to get the mould you need. If you know you shoot a ton of 38 and want the best wadcutter for the job just let us know. If you're dying to get your granddad's 351 WSL up and running let us know.
This is also a discussion thread! Please ask questions. If you're on the fence but have heard horror stories about casting please ask all of your questions here. If you don't think it will work for your firearms or style of shooting please ask here. If you don't think they have the performance needed please ask here. If you're worried about cost of startup or savings over time please ask here. If you're worried about health hazards please ask here.
This is a very rewarding hobby that can drop the cost of your reloading significantly and allow you to be the guy that shows up at the range with 1000 rounds to blow through every week.
Date November 17th 2019
Location: Fairhaven MA. Address provided upon receipt of payment.
Schedule
8:00 - 8:30 - Arrival and Set Up of Equipment for organizers
8:30 - 9:00 - Arrival and Registration for workshop participants. Donuts and Coffee
9:30 - Workshop begins
9:30 - 12:00 - First round of mini workshops - see below for explanation
12:00 - 1:00 - Lunch
1:00 - 3:30 - Second Round of mini workshops
Seminar Topics
Molten Lead Safety
Casting Terminology
Alloys, Hardness, and Uses
Smelting
Fluxing
Mold Preparation
Casting Techniques
Boolit to Gun Fit
Lubing & Sizing & Gas Checks - Tools & Techniques
Hi-Tek Coating
Further Study: Paper Patching, list of resources
Bullet Mould Modifications With A Lathe
And more
We will discuss each section and move at the rate of the class answering the questions and as soon as any eyes start to glaze off we're off to the race casting and coating/sizing lubing/slugging
Yard Sale/Swap Meet: Feel free to bring any casting related supplies to buy/sell/trade. This is your one reminder that all local laws will be followed and there is a zero tolerance policy for violation of those laws. You will be told to leave if found in violation of the law.
I hope this goes without saying, but just in case... No alcohol of any kind during the seminar.
Attendees
NHCraigT - Paid
BFDX7 - Paid
Artie - Paid
SasquatchShawn & Guest - Paid
Pete - Paid
Carl - Paid
Richardc - Paid
BroccoliIglesias - Paid
Daveusow - Paid
Jerry - Paid
76Too - Paid
Jjay - Paid
jobryan22 - Paid
Carl - Paid
Matt - Paid
martychek - Paid
KnobCreek - Paid
yanquidog - Paid
Instructors and Hopefully Guest Instructors
@pastera @BillNed @1919FAN @The Goose
Interested Attendees
@Richardgc @northny @daggrant99 @BarnBuilder @yanquidog @Artie @BFDX7 @snax
Cost $20 Via PayPal friends and family. [email protected]
Please put your full name and your NES handle in the notes.
This $20 gets you damn close to 100 years of bullet casting experience, breakfast, lunch and all the bullets you can cast while you're at the event.
If you have a firearm that you want to bring to slug the bore to see what size bullet you need to use please bring it with you.
If you have an odd cartridge or you're set on making a specific bullet please ask ahead of time and we can try to get the mould you need. If you know you shoot a ton of 38 and want the best wadcutter for the job just let us know. If you're dying to get your granddad's 351 WSL up and running let us know.
This is also a discussion thread! Please ask questions. If you're on the fence but have heard horror stories about casting please ask all of your questions here. If you don't think it will work for your firearms or style of shooting please ask here. If you don't think they have the performance needed please ask here. If you're worried about cost of startup or savings over time please ask here. If you're worried about health hazards please ask here.
This is a very rewarding hobby that can drop the cost of your reloading significantly and allow you to be the guy that shows up at the range with 1000 rounds to blow through every week.
Date November 17th 2019
Location: Fairhaven MA. Address provided upon receipt of payment.
Schedule
8:00 - 8:30 - Arrival and Set Up of Equipment for organizers
8:30 - 9:00 - Arrival and Registration for workshop participants. Donuts and Coffee
9:30 - Workshop begins
9:30 - 12:00 - First round of mini workshops - see below for explanation
12:00 - 1:00 - Lunch
1:00 - 3:30 - Second Round of mini workshops
Seminar Topics
Molten Lead Safety
Casting Terminology
Alloys, Hardness, and Uses
Smelting
Fluxing
Mold Preparation
Casting Techniques
Boolit to Gun Fit
Lubing & Sizing & Gas Checks - Tools & Techniques
Hi-Tek Coating
Further Study: Paper Patching, list of resources
Bullet Mould Modifications With A Lathe
And more
We will discuss each section and move at the rate of the class answering the questions and as soon as any eyes start to glaze off we're off to the race casting and coating/sizing lubing/slugging
Yard Sale/Swap Meet: Feel free to bring any casting related supplies to buy/sell/trade. This is your one reminder that all local laws will be followed and there is a zero tolerance policy for violation of those laws. You will be told to leave if found in violation of the law.
I hope this goes without saying, but just in case... No alcohol of any kind during the seminar.
Attendees
NHCraigT - Paid
BFDX7 - Paid
Artie - Paid
SasquatchShawn & Guest - Paid
Pete - Paid
Carl - Paid
Richardc - Paid
BroccoliIglesias - Paid
Daveusow - Paid
Jerry - Paid
76Too - Paid
Jjay - Paid
jobryan22 - Paid
Carl - Paid
Matt - Paid
martychek - Paid
KnobCreek - Paid
yanquidog - Paid
Instructors and Hopefully Guest Instructors
@pastera @BillNed @1919FAN @The Goose
Interested Attendees
@Richardgc @northny @daggrant99 @BarnBuilder @yanquidog @Artie @BFDX7 @snax
Last edited: