• If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

WTS '11-'19 Ford F-150 Pedal Commander (PC-18) *MINT*

System6ix

NES Member
Joined
Nov 21, 2012
Messages
871
Likes
544
Location
NoSho, MA
Feedback: 129 / 0 / 0
I thought I'd give this a try in my '19 Raptor SCAB and it's stupid fun, like I am going to have to replace the tires every 6 months stupid fun…lol. Lot's of fun, but totally unnecessary on a Raptor as with the combination of the motor in Sport mode and the short wheelbase SCAB, the rear wheels break lose easily as it is. The Pedal Commander was installed less than 48 hours and all original items are included. It was not mounted in the vehicle, so the velcro is still new.

===
Some info about Pedal Commander:

Eliminate Drive-By-Wire Pedal Delay. You can now eliminate annoying throttle response delay, which is well-known in 2011-2019 Ford F-150s, with a Pedal Commander Bluetooth Throttle Response Controller. Ford uses a drive-by-wire system that monitors the position of the gas pedal to control the throttle electronically, similar to a dimmer switch. The problem with this setup is that the signal from the pedal has to first be sent to the ECU, which in turn then sends the signal to the actuator motor that controls the throttle body itself. This delay is most noticeable when trying to speed up to merge with fast moving traffic or pass a slower moving car. However, you can now eliminate this annoying delay for crisp throttle response with a Pedal Commander Bluetooth Throttle Response Controller.

Four Adjustable Control Modes. Unlike other throttle control devices that are either on or off, the Pedal Commander comes with four preset control modes for Eco, City, Sport and Sport Plus driving applications. Best of all, each mode has 8 different levels of sensitivity. This will allow you to adjust each mode to your own personal driving style and needs. You can now use your smart device to change the settings instead of physically bending down and doing it manually on the Pedal Commander.

Easy Plug & Play Installation. The Pedal Commander Bluetooth Throttle Response Controller connects directly into the stock throttle position sensor. This sensor is found on the drive-by-wire gas pedal using an OEM style plug and play connector with no permanent modifications required. The Pedal Commander is 100% reversible, making it warranty friendly.

Applications. The Pedal Commander Bluetooth Throttle Response Controller is designed for use on all 2011-2019 F-150s including the FX2, FX4, Harley Davidson, King Ranch, Lariat, Limited, Platinum, STX, SVT Raptor, XL and XLT models.
===

Price: $200 (currently selling for $299 to $349) and happy to ship anywhere for no additional charge. Payment must be discreet PayPal or cash FTF. Any questions, please PM me via the forum.

Photos:
IMG_6149.jpg


IMG_6148.jpg


IMG_6150.jpg
 
Last edited:
Back
Top Bottom