• If you enjoy the forum please consider supporting it by signing up for a NES Membership  The benefits pay for the membership many times over.

Search results

  1. Which Red Dot For My Ruger PCC

    Finally found a Ruger PCC (model 19122) locally and bought it yesterday. I need a decent red dot for it and would like to keep it under $200. I have checked out a lot of "10 best red dot sights" articles on the web, but still would appreciate suggestions/opinions from my fellow NES'rs. I...
  2. Returning Kel Tec Sub 2K For Service

    I need to return my Sub 2K to Kel Tec for service and have a couple questions. 1. I believe I can send it via USPS, if anyone has done this, I'd appreciate hearing your experience/tips etc. 2. If you have dealt with Kel Tec for warranty service, how was your experience? Please feel free to...
  3. Not Happy With TSUSA Right Now

    Long story short, I did not get one of the items yesterday that I ordered back on 3/13 although my CC was charged for the complete order and the packing slip that was in one of the 2 boxes I got listed that item. I sent an e-mail to TSUSA immediately and got a reply about an hour ago requesting...
  4. .22 Plinker Pistol Recommendations

    I know I'm probably not going to be able to buy anything soon because everything will be sold due to the "uncertain future", but I'll ask anyway for future reference. I only have one .22 pistol, a Ruger MKll with a red dot I used to use for bullseye. I recently decided I needed a smaller...
  5. PSA Angryjoe AR-14 Stripped Receiver Now Available

    Just got the email, 8-10 week delivery. Sorry if dupe.
  6. Which Throw Lever for Vortex Strikeagle 1-6X?

    I've been looking at these online and can't decide. They all seem to have their share of bad reviews, flimsy, doesn't fit (loose), locking screw too long or short etc., and it doesn't seem to matter whether it is inexpensive or very expensive. So, what do my fellow NESR's use on their Strikeagles?
  7. S&W Pro Series 1911 9mm

    Long story short, my twice returned pistol is going back to S&W today for the exact same problem it had the first two times, failure to extract. Bought new from Bud's, out of the box, I could not get thru 1 mag without this problem, so back it went. After "repair", out of the box, same...
  8. Original Colt AR 20 Round Mags - Rebuild kit?

    I admit my search skills stink, so I'm asking for info on sources for procuring rebuild kits for my Colt 20 Round AR mags. I have checked a few obvious places , but they are either discontinued (Brownells) or not in stock (a few other places). They work OK, but a couple don't consistently hold...
  9. My P365 Range Trip/Observations Update #3

    See post #24 for update 03/13/19 SeePost #16 for update 2/26/19 Yesterday I had a good weather day (60 deg) to finally get the new 365 to the range (I no longer live in the Northeast). I was looking for a higher capacity, small form factor gun to replace the snubbie I have carried for 9 or 10...
  10. Osage County Guns - Good Price - Good Service

    I had not heard of these guys before, but they turned up in a search for Sig P365 12 round mags. I had recently bought a P365 but was unable to find any 12 rounders in my LGS's (note: I no longer live in the Northeast). Anyway, I decided to give them a try and ordered 3 mags at $34.99 Ea ($100...
  11. New Sig P365 Owner - Ammo And IWB Holster Recommendations?

    Went to a range a couple days ago and rented 5 small 9mm pistols looking for the best fit for my new carry gun. I have been carrying a snubbie for probably 9 or 10 years but decided I would feel a bit more comfortable with more rounds immediately available and a faster reload if needed. As the...
  12. Ruger LCR Issue

    Just wanted to let my fellow NES'rs know about an issue I had with my carry LCR. For a while, I noticed the cylinder release was getting difficult to operate. Upon closer inspection, it was very obvious that there was a tiny slotted screw projecting out below the release that I hadn't noticed...
  13. Lower Recoil .38 Special Defensive Ammo

    Due to increasingly severe arthritis in both wrists, I find myself looking for a less punishing .38 Special defensive load (lol, never in my wildest, younger imagination would I have ever thought of .38 Special as "punishing"). I have carried the Speer Short Barrel 135gr +P rnd in my LCR for...
  14. Taurus 992 22LR/22WMR Revolver-Thoughts/Experience?

    I've been keeping an eye out for a used 22LR revolver just for informal plinking. I am looking to spend the least amount I can to get a functional gun. I know most here will just say no to anything Taurus, but I have had a SS Taurus PT99 9mm pistol for at least 23 years and have put many...
  15. Looking To Buy CO2 Powered Pellet Pistol- What's Decent?

    As title says, looking to get a CO2 powered pellet pistol for backyard plinking, chasing squirrels away from the birdfeeders etc.. I have looked online and there are a ton of different makes/models out there. I don't want a rifle, pistol/revolver only. My requirements are, CO2 powered...
  16. Decent Low To Mid Priced 9MM AR Glock Mag Compatible With LRBHO

    Since my search skills really stink, I thought I would ask my fellow NES'rs to help me find potential candidates for a new AR as described in the title. It will be a range toy/plinker. I saw a Diamondback at my LGS that fit the bill for $769 but know nothing about them. In previous searches ...
  17. Wood Stocks And Humidity - What Is A Good Range?

    I never really worried about it before, but a year or so ago, I put an electronic humidity/temperature gauge in my safe that is in the house. It has been kind of obscured by stuff, so I've only occasionally noticed the reading at that particular time I opened it up. I took a bunch of guns out...
  18. Geissele Triggers - Did I Make A Good Choice? *Update*

    A few months ago I asked for opinions on AR triggers. I got many replies for Geissele triggers of one type or another and many for other brands. I was so overwhelmed with choices, I couldn't make a decision, plus the prices for many of them seemed very high Today, I thought I would check...
  19. Opinions on Carbon Fiber Cleaning Rods

    I already have nice but old Dewey coated cleaning rods although the .30 cal one has a fair amount of the coating worn off. I was wondering about updating to Carbon Fiber rods and would like to hear your comments. I looked at Tipton and Gunslick Pro, but have read a fair number of negative...
  20. Which Red Dot For Glock 19 MOS?

    About 6 months ago I asked for advice on which gen G-19 to buy. For a number of reasons, including the introduction of the MOS series, I will probably be getting a gen 4 G-19 MOS. I would like to hear from folks who have an MOS series Glock and which optic they mounted. This will be used for...
Top Bottom