Search results

  1. What's your favorite Hotel in N.H. or Maine?

    I've stayed in a lot of Hotels in Maine and New Hampshire but none of them have really stood out. Money isn't a problem but I would like some place that's has easy access.
  2. Red Dot and 125gr 9mm cast.

    I actually didn't expect a response from Alliant when I sent them this question. Can you give me a load using Red Dot with 125gr 9mm cast? Response... I suggest from 3.8 to 4.2 grs. Thanks for your note and have a nice day. Ben Amonette Consumer Service Manager Alliant Powder...
  3. PSL Shroud difficult to reinstall..

    Every time I apart my Romainan PSL I have a real hard time putting the shroud back on it. It's the same design as a AK47 but for some strange reason the shroud is just a lot of trouble. I was actually thing about filing down the rear sides of the spring rod a little bit. When it's in there is...
  4. 9MM Cast load?

    I found a good deal on 9mm cast, $116 for 2000 125gr RN with a Brinell 18 rating. I was thinking about using Unique but all the loads that I have seen for 9mm with Unique seem that you have to really compress the powder. I have used Universal in the past and didn't like it. Can some one...
  5. Good example of why 1 gun a month won't work..

    Pursuant to an ongoing investigation, officers from District C-11 (Dorchester) Drug Unit applied for and were granted a search warrant for 3 Coleman street #1 in Dorchester by Dorchester District Court. Yesterday around 3:00PM, officers armed with the search warrant made entry to the above...
  6. This made me feel bad at the range..

    I walked into the range and there was only one other person there, a woman shooting in a booth. She was shooting at a target 30ft. away and had a empty 50 round box on the bench and the target had about 3 holes in it. She gave me a funny look and I said to her, can I help you. She said, I...
  7. Vietnam Veterans statistics

    This is an e-mail I received from my old unit. Vietnam. "Of the 2,709,918 Americans who served in Vietnam, Less than 850,000 are estimated to be alive today, with the youngest American. Vietnam veteran's age approximated to be 54 years old." So, if you're alive and reading this, how does...
  8. This guy makes great you tube videos.

    It's not really the video as much as what He says. http://www.youtube.com/user/johniac7078#p/a/u/2/QSS8tI1vnYY
  9. W231

    It seems that W231 is getting real hard to find. I have other powders that I can use but I'm down to my last 2 pounds and would like to buy at least 4 more pounds of it too last me until the supply of it improves. Has any one seen any locally?
  10. Any one see any 762x54r

    Please Delete
  11. S&W Military & Veterans 40% Discount..

    I just got my new gun from the S&W 2009 Military Discount program. If you had a Military I.D with your picture and Social Security number on it you qualifed for a 40% discount on the firearms they sold. But S&W was over whelmed in Dec. by the response for the 2009 offer because it was a...
  12. Cracked Aligment sleeve

    I was chugging along pumping out 45acp when the seating die came apart and stayed on top of the round. Some how the seating stem and alignment sleeve came out past that little snap ring. Looking at it closely I realised it was really filthy so I took it all apart to clean it. Cleaning it...
  13. Shameless plug for Andy Langlois aka Andy's Leather

    As you all know Andy Langlois is a member here who is a very talented leather maker and owns Andy's Leather. In the past I've always purchased my belts from the beltman and my Holsters from a variety of different Companies. I recentlly put in a order for a belt and a Yaqui Holster from...
  14. The real price of Colts in the free world.

    One good reason every one should send Colt a e-mail asking them to get Ma approved.. http://www.budsgunshop.com/catalog/product_info.php/cPath/21_141/products_id/36102
  15. Decapping splindle slipping

    I have a brand new set of Hornady 9mm dies and as hard as I try, I can't get the sizing/depriming die setup right. For some reason the spindle keeps slipping and won't lock in place and as a result it won't knock a primer out.. I've adjusted it and have tightened the spindle lock with a...
  16. Staking, penning or pressing a strut to a 1911 hammer..

    What's your favorite method for attaching a strut to a 1911 hammer. I was thinking of staking it but the more I think of it penning it with a 4 ounce ball penn hammer seems little easier.
  17. I learned some thing new

    I called Hogdon Powder and asked them about loading 147gr moly coated 9mm bullets with Universal and this is what they said. We can't tell you much about them because We can't test them. They ruin our barrels for testing any thing else because their so slippery. If your going to load them...
  18. Loads for 147gr Black Moly 9mm.

    Has any one got a load for 147gr Black Moly coated 9mm using one of these powders? Unique, W231, Universal Clays or Red Dot? I'm not adverse at all to going out and getting a another powder is please feel free to list one. Plus if you could list the OAL too it would be appreciated..
  19. Hornady 9mm dies & Shell Plate

    I don't know why but I got the urge to load 9mm. I already had around 300 cases saved so I ordered 1000 more cases and 1500 moly coated 147gr. bullets. So after I put the order in I went looking for Hornady Dies and a Shell Plate. 6 places had them on back order. One place that had them won't...
  20. Primer locking up revolver..

    I was at the range using a 625 with moon clips when the cylinder locked up. I got it open and dropped the moon clip out and noticed that a primer was missing in a unfired round. I'm postive that the rounds all had a primer in them when I started. When I reload I take all the rounds and...
Top Bottom