Search results

  1. beretta 21a bobcat

    not anything I could do. It sits at the back of the safe now.
  2. WTT 8lbs HP38 for 223 powder - H335, WC844, BLC2, TAC, etc

    I have a new unopened 8lb jug of HP38 I will trade for the same amount of powder usable for 223 reloading. Preferred TAC or H335 but will considers others. HP38 is new production. Contact by PM here is best Have a LTC Meet near Worcester. As always, goose rules apply and all laws...
  3. WTS LPP and Benchrest LRP

    Two boxes S&B large pistol primers $150 / k Two boxes CCI BR-2 Large rifle benchrest primers. $170/k Meet near Worcester / Leominster area Must have LTC. Cash only message here for response
  4. 1911 holster recommendations

    Warbird leather if you don't mind spending some money. Custom made , colors, types of leather,etc
  5. SBS transfer in TPRM?

    SBS is a "firearm" under MA law and since it is not on the roster a dealer is not supposed to transfer it. Healy rule which actually under strict interpretation is correct. Good luck.
  6. Bullet Casting PID Temperature Controller

    I sourced all my parts from ebay. Only problem is I had to look up the directions for the PID by googling the PID type. Easy enough to do, though.
  7. Harvard sportsman’s club

    As I said. everyone who has joined for the last several years plus is told that exact thing by Dan at the membership meeting. that would be more than one thousand people at a minimum. He uses a chencklist of points that he goes over during his talk. Every member that joins must go to the...
  8. Harvard sportsman’s club

    During the intro talk Dan gives at every meeting it is mentioned that's drawing from a holster is reserved for the action pits including th SASS pits. Anywhere that has benches to shoot From is supposed to be for firearms out on the bench and not from holsters. I have heard that speech dozens...
  9. Mosin Nagant KO-91/30

    Circle C Mark on the barrrel is considered a sign of a Fake sniper. Ukraine made fake. You can research it some more but IMO it's fake
  10. Mosin Nagant KO-91/30

    Edit. The markings should include a "CH" on the barrel to designate a sniper. I don't see that so I will say my initial opinion is suspect. Who is marked as the importer? That is a genuine scope and a genuine sniper IMO. The mount is serialized to the rifle as it should be. Does the...
  11. Arisaka type 99 light loads

    Trailboss with a lead 200gr cast bullet. Lubed and gas checked. Next up is trying to powdercoat them. Sight goes at the 300m? setting to get close to zero. Tried 4895 and had squibs and hangfires. I have plenty of trailboss so I will just use that.
  12. Possible double charge in 45acp

    Break them all down unless its cheaper to buy a new $1k pistol. If not then shoot away with a glove, ear pro and a welding mask. Start by doing 100 at a time and checking each 100. Better when there is a problem to pull 100 than 500. My top was pulling 200 with a kinetic puller over...
  13. INS stamp required

    Happens to me occasionally too. You expect the RMV computers to be accurate!?!? HA.
  14. 5.56 federal msr gone from Target Sports in record time

    AIM years ago got in a conex of 5.45. Something like 1.3 plus million rounds. It was gone in a few hours. That was right when 5.45 dried up a few years ago and it was the only surplus posted at that point. Got in on it early, waited a short while to buy more and it was gone. Target sports...
  15. INS stamp required

    Mass requires insurance to register. You don't have "insurance on file" so they won't renew it. Call your insurance agent and they can help you out.
  16. What did you do in the reloading room recently?

    loaded 500 45 ACP jacketed 230gr RN with HP38 and with S&B Large pistol primers. Found out that some brass is tight with these primers. CBC, Herters, a couple others. Really messed with the rythm of loading. Going to try CCI LPP for the next few hundred and see if it was just the primers...
  17. What did you do in the reloading room recently?

    Loaded 150 44mag with 240gr lswc. Cast, lubed, sized and gas checked by me. Loaded over 7.0 grains of Universal and another set at 10g Universal. Hope to try them out tomorrow They are a little frosty which I now understand means I had the mold too hot. Makes sense since the spruce puddle...
  18. Make Your Own Prepared Cases for Hornady OAL Gauge

    How do you get the case mouth .003 wider than normal so the bullet will slide in and out?
Top Bottom