Search results

  1. WTT 8lbs HP38 for 223 powder - H335, WC844, BLC2, TAC, etc

    I have a new unopened 8lb jug of HP38 I will trade for the same amount of powder usable for 223 reloading. Preferred TAC or H335 but will considers others. HP38 is new production. Contact by PM here is best Have a LTC Meet near Worcester. As always, goose rules apply and all laws...
  2. WTS LPP and Benchrest LRP

    Two boxes S&B large pistol primers $150 / k Two boxes CCI BR-2 Large rifle benchrest primers. $170/k Meet near Worcester / Leominster area Must have LTC. Cash only message here for response
  3. H4895 reduced rifle loads?

    Anyone have good experience with them? How about in 7.7 Arisaka? Looking for some input as I just loaded a few and think I may have issues. Not going into detail yet as my sample size is too small.
  4. H&R revolver gunsmith recommendation

    I have an old H&R 32 S&W top break revolver that has broken the flat spring that is attached to the arm. Does anyone know of a gunsmith that would work on an old gun that will not charge a ton? Considering this is a $150 gun (at best) I hate to spend more than that getting it running again...
  5. C&R to C&R transfer in MA, questions on eFA10 transfer or registration???

    I have never transferred a C&R out of my possession and I think I am going to be selling one C&R rifle to another C&R holder in MA. Here's the question: Do we exchange C&R licenses, I log out and he then logs in and then he does an eFA10 as registration? Or do we need to do a normal...
  6. Careful what you say on a forum, SEI sues poster on another forum

    I NEED A LAWYER....Served with SEI Lawsuit Today - M14 Forum SEI serves a guy who posted hearsay about their receivers being delayed... The bad press alone will lose them more customers than one mans postings IMO
  7. T&G editorial, my head just exploded

    Everyone should read the T&G editorial today on the gun control hearings. I can't believe what I read... An actual opinion that firearms and their owners should not be demonized and the criminal element should be held accountable. That's crazy talk for a newspaper! I actually might have...
  8. USPSA club near Berwick, Maine??

    My son, an avid USPSA shooter has move to Berwick Maine and we are looking for a club that he could practice at, and one that possibly has an active USPSA presence. We belong to Harvard currently and are looking for a similar setup. Anyone aware of a club in the ares, either Maine or NH...
  9. Mosin crate coffee table, my version - work in progress

    After seeing a Mosin Nagant crate in the Karma section and seeing this: Mosin Nagant Rifle Crate Coffee Table « AIM I knew I had to make one. Long story short, the original winner backed out and I ended up meeting a great member who gave the crate to me. I have done rough and some finish...
  10. MGs to become worthless in NY, MA next?

    With a 7 round max mag and any mag over that not grandfathered, what do you think will happen to MGs? Basically they become worthless in NY and I see MA copying this word for word. MG prices could plummet if it looks like this is a done deal in many states.
  11. Anyone local do Nickel Boron?

    Trying to see if somone local does NiB or some other hard coating besides Ceracoat. Really dont want to spend $50 shipping a gun one way for a coating.
  12. Wolf small rifle primers in pistol. EDIT: KVB556Mprimer

    Asking specifically if anyone has used the (EDIT:) KVB556M Small rifle magnum Wolf primers in 9 and 40. I know some have used Wolf but the have three different rifle primers and want to make sure I get one that will go bang in a stock Glock. Thanks PS. I know they have to be firmly...
  13. AC556. Positives and negatives??

    Looking at a AC556 as it looks like the cheapest way to get a 223 MG. anyone with direct experience? Looks like this is as far as I want to stretch so the idea of a M16 is a no go. Thanks
  14. 9mm frangible reloading - now with pics and range report

    I ended up with about 3k 90 grain 9mm frangibles recently. After reading online about these I began to second guess my purchase for my intended purpose, cheap plinking loads for an open bolt subgun. I kept getting generic comments on the net that they "won't run" in an open bolt gun. If I had...
  15. Gun shops near Kittery / Berwick Maine??

    Vacation time and looking for any gun stores near either town besides KTP. Ideas? Suggestions? Places to stay away from? Thanks.
  16. Parking local to Worcester? small job

    Anyone local to Worcester do inexpensive parking? I have a couple metal mags that I had to file the back of to get them to fit. They are already grey parked and just looking to get them parked so they dont rust as easy. Now sure if the bare area needs anything as it is pretty slick from...
  17. 1914 Izhevsk Finn captrue?? Help with info and ID please, pics inside...

    Please forgive me if I mislabel a part or misidentify anything, I am new at this. I posted this on another board but know there are a bunch of MN people here also. Found this at the local gun show today. From what I read so far it appears to be a 1914 Izhevsk Dragoon that is a Finn...
  18. Varying OAL with 40 S&W

    Finally started reloading 40 S&W on my LnL with a set of Lee dies. I used these dies before in a single stage and had no problems. I am running pulled 155gr bullets and most have small marks along the curved surface where (I assume) a puller grabbed them. I initially set up my OAL at...
  19. Powder recommendation for 44 Mag

    Just reloaded 100 44 mag using H110. Not sure if I like this powder as it seems super fine and has a little bit of variation when using my Hornady powder drop. I need to run pretty much full 44 mag loads as I am loading for a Ruger 44 mag carbine and mild loads wont cycle the action and pretty...
  20. Reloading molds and sizers find, what do I have?

    Posted on cast boolits but I would like tohave somone that actually knows this stuff take a look at some of it. I was just given a bunch of casting gear from a friend whose relative no longer uses it. I am not sure of the value of any of it as most of it seems to be pretty old. I have found...
Top Bottom